oreilys Posted June 5, 2010 Report Share Posted June 5, 2010 guys im having trouble with my shee... its been giving me this problem since its been together for 3 months.. ..ok question guys i've been thru every electrical part on my bike, brand new reeds and carbs.. bike will break up in the high rpms.. is there something wrong with the engine possibly?? its a 4mil dune port from kev Quote Link to comment Share on other sites More sharing options...
fck55mph Posted June 5, 2010 Report Share Posted June 5, 2010 ive heard plug caps do it but you said youve been through all electrical... Quote Link to comment Share on other sites More sharing options...
volcrano Posted June 5, 2010 Report Share Posted June 5, 2010 guys im having trouble with my shee... its been giving me this problem since its been together for 3 months.. ..ok question guys i've been thru every electrical part on my bike, brand new reeds and carbs.. bike will break up in the high rpms.. is there something wrong with the engine possibly?? its a 4mil dune port from kev what is ur timing set at?set it to 0 degrees.is ur jetting on,too rich will blubber the top end.did it always do it?if not did u change or adjust something? Quote Link to comment Share on other sites More sharing options...
camatv Posted June 5, 2010 Report Share Posted June 5, 2010 you may be blowing the spark out ( most likely?) unscrew the caps off the coil and look at the wire in the plug wires is it rusty? is the cap make noise if you shake it ( resistor failure) try using a fine wire plug like a b8eg or b8evix ( oreilly's should be able to get them) might get a spark tester and see if it will jump a good sized gap.. Quote Link to comment Share on other sites More sharing options...
firebanshee Posted June 5, 2010 Report Share Posted June 5, 2010 X3 for new plug caps. Quote Link to comment Share on other sites More sharing options...
BellicoseBanshee Posted June 5, 2010 Report Share Posted June 5, 2010 Check the pick-up gap as well... Quote Link to comment Share on other sites More sharing options...
theoriginal87 Posted June 5, 2010 Report Share Posted June 5, 2010 +2 on pickup gap and check your flywheel and make sure its in good condition. p.s. had the same problem turns out i had a bad flywheel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.