randomrider Posted March 31, 2010 Report Posted March 31, 2010 i am relocating my key switch and wanted to know where others have mounted theirs? Quote
SD1026 Posted March 31, 2010 Report Posted March 31, 2010 i am relocating my key switch and wanted to know where others have mounted theirs? i bought the bracket that mounts under the seat from jds customs. well worth the money. it mounts up with your gas tank screws. Quote
Fast-Fibers Posted March 31, 2010 Report Posted March 31, 2010 i bought the bracket that mounts under the seat from jds customs. well worth the money. it mounts up with your gas tank screws. The bracket jds makes is the normal and best place to relocate the key. Very simple and looks great. Quote
ban99 Posted April 1, 2010 Report Posted April 1, 2010 prior to powdercoating my frame I welded a large fender washer in the same place these other guys are talking about. Just works out to be the best place i.m.o. Quote
Bansh-eman Posted April 1, 2010 Report Posted April 1, 2010 I reloacted mine to the trash. All you have to do is jump the wires and you can toss the key out the window. Quote
Fast-Fibers Posted April 1, 2010 Report Posted April 1, 2010 I reloacted mine to the trash. All you have to do is jump the wires and you can toss the key out the window. That works too. I like to be able to remove my key at the dunes when I leave the bikes out overnight. Quote
J.J. Posted April 1, 2010 Report Posted April 1, 2010 Home made, no need to modify the wiring loom, should be long enough to reach this position. Quote
bansheesandrider Posted April 1, 2010 Report Posted April 1, 2010 I mounted mine under the rear of the seat, it sticks up through the hole in the rear plastic that the overflow bottle lid used to reside in. The wires are plenty long, you just have to unwrap the harness and reroute them. I might have even shortened them, I don't remember. I built my own bracket to do it. I to like to have the key switch for when I am away from the bike and it is sitting out. Quote
toytech Posted April 1, 2010 Report Posted April 1, 2010 i am relocating my key switch and wanted to know where others have mounted theirs? I mounted mine in the gas tank cover on the left side top front of cover Quote
Koolguyson Posted April 3, 2010 Report Posted April 3, 2010 That works too. I like to be able to remove my key at the dunes when I leave the bikes out overnight. Hopefully that isn't your security. It takes less than 5 minutes to hotwire a banshee Quote
Como Posted April 6, 2010 Report Posted April 6, 2010 Hopefully that isn't your security. It takes less than 5 minutes to hotwire a banshee What would you say is the best security? Quote
banshee#44 Posted April 6, 2010 Report Posted April 6, 2010 What would you say is the best security? chain your shit up Quote
bansheesandrider Posted April 6, 2010 Report Posted April 6, 2010 What would you say is the best security? A big mean dog tied to the bike and a .45 under my pillow. I also use a disc lock on each bikes brake rotor and run a braided Kryptonite cable through all the bikes and the frame of the trailer. Quote
RagunCajun Posted April 6, 2010 Report Posted April 6, 2010 I reloacted mine to the trash. All you have to do is jump the wires and you can toss the key out the window. +1. It's pointless. Only thing keys do is piss you off when you forget it. As for theft. It's real easy for someone to figure out how to hot wire a bike once they steal it and it's not at your house anymore. They can just search on bansheehq... Quote
bbcmudtruck Posted April 6, 2010 Report Posted April 6, 2010 relocate to the trash and put a pro design tether on it! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.