Outlander 800R vs Banshee

[Whyzedtwofiveoh]

Okay so i know this person who just bought an Outlander 800R. He wants to race me on my banshee. My banshee has an K'N filter and some porting done to it. 23 inch tires and 14/42 gearing. It is neck and neck with my dads YZ250 off the line and takes him on top end easy. Im going to have studs in my tires and the outlander will have none, but will be racing in 4 wheel drive. Not really sure how far the race is going to be, but its on a lake maybe 500 feet. So do i have a pretty good change at winning or am i going to get owned?

[VegasJeff]

Okay so i know this person who just bought an Outlander 800R. He wants to race me on my banshee. My banshee has an K'N filter and some porting done to it. 23 inch tires and 14/42 gearing. It is neck and neck with my dads YZ250 off the line and takes him on top end easy. Im going to have studs in my tires and the outlander will have none, but will be racing in 4 wheel drive. Not really sure how far the race is going to be, but its on a lake maybe 500 feet. So do i have a pretty good change at winning or am i going to get owned?

race him and report back with the results!

[Drewski]

Man, those outlanders and renegades are FAST! For how big and heavy they are, they move. I'm guessing it's going to be close as long as you hook up well. Just think, It's 4 wheel drive and an 800. I ran with one side by side but never dragged him from a stop. At that time I think he would have killed my shee. Give it a shot and let us know. Don't let us down!

[tecateman]

dude your racing on ice with studs and hes not running studs.4wd or not i dont see how you can lose.

[Drewski]

dude your racing on ice with studs and hes not running studs.4wd or not i dont see how you can lose.

shit. I should read the hole post before answering.......You should kill him.

[Whyzedtwofiveoh]

Yeah, i hope theres not to much snow on the lake though, its not a clear drag strip or anything, theres going to be a fair bit of snow on it to , i should be able to take him i think plus i have brand new chain and sprockets to put on

[shawn941]

dude your racing on ice with studs and hes not running studs.4wd or not i dont see how you can lose.

x2

[esterelbanshee]

If you race on bare ice he wont have a chance. If theres a decent amount of hard packed snow, you may have traction issues and a tough time reeling him in in only 500 feet

[87sheerips]

Vs. stock banshee you are toast on a good surface

[Whyzedtwofiveoh]

Vs. stock banshee you are toast on a good surface

Well its not exactly stock, just stock pipes, its really surprising a mechanic used to own it and he screwed around with it alot, and it works great. Pulls on my Dads YZ250 and takes him on top end really easy. Im only around 2 bike lengths behind him at all time until 5th Its got some intake and exhaust porting and a shaved head plus its bored out .10 I think. It just has stock pipes and im working on buying some

[papa_smurf49319]

check the for sale section, theres alot of cheap pipes on there all the time. Just make sure you buy from someone reptuable on the site.

 

 

Cody

[Ieat4strokes]

Post back with results, them 800rs are quick!

[bbcmudtruck]

I agree, on dry ground that outlander will own you. My buddy has a thundercat 1000 and he destroys built 450s in a 300ft dirt drag!

[Hilarious]

has this race went down yet?

 

i had a good running 700raptor and my outlander 800r would run with it all day.

and my raptor would smoke a piped banshee.

if your friend with the outlander can launch it without looping it, he should be right there with your banshee.

dont miss a shift either, all your friend has to do is mash the gas and he's gone.

[Whyzedtwofiveoh]

has this race went down yet?

 

i had a good running 700raptor and my outlander 800r would run with it all day.

and my raptor would smoke a piped banshee.

if your friend with the outlander can launch it without looping it, he should be right there with your banshee.

dont miss a shift either, all your friend has to do is mash the gas and he's gone.

Nope race hasnt happened yet, i pulled my axel off and my rear brake caliper bolts broke so im working on that still. I'll post results when we do