13RAZOR13 Posted January 5, 2010 Report Share Posted January 5, 2010 521cc 10mil cheetah motor Built and ported by nano that used to work at d&m racing 72mm pistons (new) 165 psi comp 10mil crank new from crank works intakes for 39-41's 1-5 override (rudy kurtz) vforce reeds new vortex clutch basket new clutch direct drive lockup lightened fly wheel advance plate new stator Motor maybe has a few hours of run time compression test is perfect, with 150lb rider in a stock modified chassis was doing 78-80 at olds hill. options: motor with everything listed above - $4200 motor with everything listed above and 39 pwks/billet bowls - $4550 motor/carbs/shear big bore hand made- $ 4900 please pm me with any offers/ questions call or text for fastest response 623 628 7778 Quote Link to comment Share on other sites More sharing options...
TF7 Posted January 6, 2010 Report Share Posted January 6, 2010 would you sell them carbs only and if so how much? Quote Link to comment Share on other sites More sharing options...
13RAZOR13 Posted January 6, 2010 Author Report Share Posted January 6, 2010 425 with billet bowls. There polished Quote Link to comment Share on other sites More sharing options...
13RAZOR13 Posted January 7, 2010 Author Report Share Posted January 7, 2010 Up for going fastttt Quote Link to comment Share on other sites More sharing options...
13RAZOR13 Posted January 19, 2010 Author Report Share Posted January 19, 2010 $3600 Quote Link to comment Share on other sites More sharing options...
Gman-7m Posted February 19, 2010 Report Share Posted February 19, 2010 521cc 10mil cheetah motor Built and ported by nano that used to work at d&m racing 72mm pistons (new) 165 psi comp 10mil crank new from crank works intakes for 39-41's 1-5 override (rudy kurtz) vforce reeds new vortex clutch basket new clutch direct drive lockup lightened fly wheel advance plate new stator Motor maybe has a few hours of run time compression test is perfect, with 150lb rider in a stock modified chassis was doing 78-80 at olds hill. options: motor with everything listed above - $4200 motor with everything listed above and 39 pwks/billet bowls - $4550 motor/carbs/shear big bore hand made- $ 4900 please pm me with any offers/ questions call or text for fastest response 623 628 7778 Hey dude, this !NEW 10mil engine! you sold me for $3200.00 is very much used, it broke down on the second run at banshee hill, upon tear down inspection, surprise surprise, you ripped me off, return my money for the engine as you said you would, you have been avoiding me and not answering my messages, I will post pictures of the engine parts for you and other members to view. MAKE IT RIGHT ***13RAZOR13***, YOUR EXCUSES DO NOT MAKE SENSE ANY MORE............. Quote Link to comment Share on other sites More sharing options...
Mjv420 Posted February 20, 2010 Report Share Posted February 20, 2010 Just curious, what did you find upon tearing down the motor? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted February 20, 2010 Report Share Posted February 20, 2010 Shitty deal. Sitting and waiting. Quote Link to comment Share on other sites More sharing options...
Onesickcrewcab Posted February 20, 2010 Report Share Posted February 20, 2010 Post up the pics. Describe how you got ripped off so everyone knows. Quote Link to comment Share on other sites More sharing options...
Gman-7m Posted February 20, 2010 Report Share Posted February 20, 2010 Just curious, what did you find upon tearing down the motor? Thanks for asking, found a badly worn, used and twisted crankshaft with a poor epoxy pach that blew out of the upper crankcase that looked from a previous repair. Quote Link to comment Share on other sites More sharing options...
jrmarquez.702 Posted February 20, 2010 Report Share Posted February 20, 2010 [/img] Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted February 20, 2010 Report Share Posted February 20, 2010 DAMN!!! This was only ran a couple pulls before you bought it? Quote Link to comment Share on other sites More sharing options...
jrmarquez.702 Posted February 20, 2010 Report Share Posted February 20, 2010 here is the "brand new crank from crankworks" = used stock crank, looks like it was stroked to a 10mil by a&s ....i called crankworks and it was rebuilt about 6 months ago.. Still not a new crank from crankworks... rudy kurts tranny= tyson shift drum, im assuming he cut the tranny as well.. new vortex clutch basket= a very used and chewed up basket, later he told us that one of the arms on the lockup came off and thats why it was chewed up.."new?" new clutch= come on man, u and me both know that thing was smoked!!! the first run at dumont the crank twisted and blew a hole in the cases, caused a lean condition and melted the pistons and head...brand new motor? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 20, 2010 Report Share Posted February 20, 2010 damn, this is not looking good. the so called new parts are def not new... Quote Link to comment Share on other sites More sharing options...
kawiking Posted February 20, 2010 Report Share Posted February 20, 2010 thats a fucked up deal .. hope he makes it right. i will say , anyone that buys a "NEW' or USED motor , should tear it down as soon as they get it. seen to many "NEW' motors go boom. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.