official_style Posted May 23, 2009 Report Posted May 23, 2009 just installed a moose stator in each of my 2 banshees. one starts, but runs like shit and misses at high rpms. the other one has no spark. i know it was not install error, i have installed over 20 stators and never had a problem, not even once. any ideas, or are these things just fucking junk like ricky stator bullshit? i knew i should have stayed with oem ones. Quote
sheerider1026 Posted May 23, 2009 Report Posted May 23, 2009 why is it so diffucult for these aftermarket companies to make a good quality stator for the banshee??? i have always wondered.. Quote
official_style Posted May 23, 2009 Author Report Posted May 23, 2009 i have no idea, but i learned my lesson, im only running a stock stator, or a rewind if i ever find someone good to do it. the moose ones i got look just like ricky stator ones. even says made in china on the box. probably from the exact same sweatshop lol. Quote
sheerider1026 Posted May 23, 2009 Report Posted May 23, 2009 yea.. a stator is a simple deal really.. they must be using the cheapest wire they can find to wind these things up.. a good oem stator is the way to go!! Quote
LS1Inferno Posted May 23, 2009 Report Posted May 23, 2009 I would like a better stator too, but am not spending that much cash on all this junk out there. Im going to take one of my OEM ones and buy me a spool of magnet wire and do it my damn self. If i successfully get a good HO stator ill post a how-to. If i dont, ill just float my stock stators ground an convert to DC, just use it as charging circuit, doesn't really need much output to keep a little 12V battery powered up. Quote
jbooker82 Posted May 23, 2009 Report Posted May 23, 2009 I think I would try a Ricks Electric Motor Sports Stator. The pickup coil looks to be made differently. The housing is different shape. The Rick Stator and RM stator's all look to have the same pickup. There stator is about the most expensive stator out there other than a new oem. I would only buy it from them though so if you have warrenty issues your not trying to deal with a 3 rd party member on ebay. Ricks seems to be a mom and pop shop for now. Kind of like how ricky stator started out as. http://www.ricksmotorsportelectrics.com/pr...DRZYW1ZRlozNTA= http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sspagenameZWDVW Quote
official_style Posted May 24, 2009 Author Report Posted May 24, 2009 I think I would try a Ricks Electric Motor Sports Stator. The pickup coil looks to be made differently. The housing is different shape. The Rick Stator and RM stator's all look to have the same pickup. There stator is about the most expensive stator out there other than a new oem. I would only buy it from them though so if you have warrenty issues your not trying to deal with a 3 rd party member on ebay. Ricks seems to be a mom and pop shop for now. Kind of like how ricky stator started out as. http://www.ricksmotorsportelectrics.com/pr...DRZYW1ZRlozNTA= http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sspagenameZWDVW the pickup looks just like the moose ones i have. the rest of the stator looks different, but im done being a guinea pig. i can change stators like im in fucking nascar now, but i dont like doing it. Quote
FireHead Posted May 24, 2009 Report Posted May 24, 2009 I think I would try a Ricks Electric Motor Sports Stator. The pickup coil looks to be made differently. The housing is different shape. The Rick Stator and RM stator's all look to have the same pickup. There stator is about the most expensive stator out there other than a new oem. I would only buy it from them though so if you have warrenty issues your not trying to deal with a 3 rd party member on ebay. Ricks seems to be a mom and pop shop for now. Kind of like how ricky stator started out as. http://www.ricksmotorsportelectrics.com/pr...DRZYW1ZRlozNTA= http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sspagenameZWDVW I have always had good luck with the Rick's stuff.............. Everything else besides OEM and Rick's are not so good..... :geek: Quote
Rodneya Posted May 24, 2009 Report Posted May 24, 2009 Has anyone got any input on rewinding the stock stator. Good or bad Quote
dirtclod20 Posted May 24, 2009 Report Posted May 24, 2009 Has anyone got any input on rewinding the stock stator. Good or bad does anyone have the gap spec for the magneto and pickup spacing? Marcus Quote
AKheathen Posted May 24, 2009 Report Posted May 24, 2009 Has anyone got any input on rewinding the stock stator. Good or bad rewinding the stocker is about the best option out there, unless a fucktarddd does itta. or were you talking about diong it yourself? pickup gap... do a search, or use a buisness card. it's been posted so much, i don't feel lke sayin 18-20 again. damn it1 i said it again Quote
official_style Posted May 28, 2009 Author Report Posted May 28, 2009 i emailed moose, and they had someone from electrosport get back to me. apparantly electrosport makes mooses stators now, and they offered to exchange or refund. i of course am getting a refund, i just hope i can save someone the hassle of what i went thru, and for nothing! Quote
Overboost Posted May 30, 2009 Report Posted May 30, 2009 pickup gap... do a search, or use a buisness card. it's been posted so much, i don't feel lke sayin 18-20 again. damn it1 i said it again but you just did...... Quote
NickisGod Posted May 30, 2009 Report Posted May 30, 2009 ive always use rm stators, the only problem ive ever had they tryed giving me a 100 vs a 200 watt. never had any complains! Quote
jbooker82 Posted May 30, 2009 Report Posted May 30, 2009 i emailed moose, and they had someone from electrosport get back to me. apparantly electrosport makes mooses stators now, and they offered to exchange or refund. i of course am getting a refund, i just hope i can save someone the hassle of what i went thru, and for nothing! I have an electro sport stator in my raptor. I havent had any problems. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.