Willie the wimp Posted April 18, 2009 Report Share Posted April 18, 2009 I am putting my first set of paddles on and need a bit of advice. I know that when you put them on that you are supposed to try to get them so the paddles grab evenly. I have adjusted them spline by spline and they are as close as they can be but one is still slightly ahead of the other. Is this going to really affect the ride? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
LS1Inferno Posted April 19, 2009 Report Share Posted April 19, 2009 if its just a little bit it depends on your pressure and setup, but a little wont hurt slow but can get some speed wobble. I get my hubs even then align one paddle with the valve stem and am good to go Quote Link to comment Share on other sites More sharing options...
official_style Posted April 19, 2009 Report Share Posted April 19, 2009 shit i never even thought of that, hopefully rmatv has them lined up close. Quote Link to comment Share on other sites More sharing options...
shee4speed Posted April 19, 2009 Report Share Posted April 19, 2009 The only time you will really notice it is on hard surface.You will feel it pretty bad going slow.Other than that,I dont think it really makes a shit.I always line mine up though :biggrin: Quote Link to comment Share on other sites More sharing options...
brian Posted April 19, 2009 Report Share Posted April 19, 2009 I have never purposely lined up the paddles and I have never had a problem. Seems kinda OCD to me to line up the paddles. They turn so fast that I just cant see where it would make a difference either way. Quote Link to comment Share on other sites More sharing options...
RIPPEN Posted April 19, 2009 Report Share Posted April 19, 2009 I get mine close but never went that far outta my way(IE remove hubs) to make them line up.. Have never had any problems.. As they are pretty close Iam sure your good to go.. RIPPEN Quote Link to comment Share on other sites More sharing options...
official_style Posted April 19, 2009 Report Share Posted April 19, 2009 ill see how far off they are, i would rather do it here before i leave, while i have the air tools, than have some problem and have to do it with a BFP Quote Link to comment Share on other sites More sharing options...
Willie the wimp Posted April 19, 2009 Author Report Share Posted April 19, 2009 Thanks for the info guys! Puts my mind at ease that it should be fine the way I have them lined up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.