more power

[350banshee]

hey guys just wondering whats the next step to get more power? i have done the following things, pipes, port+polish, rad valves, power reeds, boost bottle, K&N filter. Any good parts would be a great help thanks

[F.T.W. Banshee]

I would get a coolhead.

[MikeNick]

Ditch the boost bottle for a stock crossover tube and get a NOSS or CHARIOT coolhead and adjustable timing plate.

[Ieat4strokes]

dang why all the pro design head hatin? lol

 

but yea i was gonna say get u a coolhead with some smaller domes to bump ya compression up..... i noticed a good improvement on my stock cyl motor....

[RagunCajun]

You can save some money and get your stock head milled for cheap. I do own a noss head and love it but it will save you some coin. Changeable domes kick ass though! And adjustable timing plate as mentioned.

Edited February 26, 2009 by RagunCajun

[jbooker82]

Should have done the 4 mill crank.

[uwenr]

hey guys just wondering whats the next step to get more power? i have done the following things, pipes, port+polish, rad valves, power reeds, boost bottle, K&N filter. Any good parts would be a great help thanks

Save your money just mill your head and get a ricky stator timing advance plate. Measure your squish, you want it to be between .030 and .040 that will tell you how much to mill off. You can get it done for around $50 to $75 the timing plate is $35. For $100 buck you will see a huge difference.

https://www.rickystator.com/catalog/product...8d9b252594773ec