97banshee07 Posted January 30, 2009 Report Posted January 30, 2009 my swingarm bolt will not come out, I am not sure whats wrong with it, I believe the collars and carriers may be rusted to the bolt because i can puit a wrench on the bolt and spin the bolt but I have taken a hammer to it and it will not move at. Any help will be great. Oh and yes I did take the nut off Quote
locogato11283 Posted January 30, 2009 Report Posted January 30, 2009 sounds like youre gonna need to beat it out. it sucks, but it may be the only way. if you do destroy it, pm NYUK here on HQ. im sure he has one laying around. Quote
magz Posted January 30, 2009 Report Posted January 30, 2009 what loco said, ganna need a long punch or screw driver, it could be bent, my buddy had a bent one and we need the 10lb bfh to remove it. plus his swing arm was toast too....=\ Quote
bushka Posted February 2, 2009 Report Posted February 2, 2009 what loco said, ganna need a long punch or screw driver, it could be bent, my buddy had a bent one and we need the 10lb bfh to remove it. plus his swing arm was toast too....=\ I had to get the sawzall out...i was jumpin with a plus 6 and the bolt bent Quote
2001Stroker Posted February 2, 2009 Report Posted February 2, 2009 Yup, sounds like it got some grooves cut in it. I hate to make an echo in here, but you're probably gonna need to sawzall it out. Quote
uwenr Posted February 2, 2009 Report Posted February 2, 2009 I had to get the sawzall out...i was jumpin with a plus 6 and the bolt bent second that just sawzall it Quote
NYUK Posted February 2, 2009 Report Posted February 2, 2009 i have the bolt and a swingarm. make sure you cut the bolt. the sleeve is hardened.you will go through a pack of bladeds cutting 1 side of the sleeve. Quote
BansheeRider87 Posted February 2, 2009 Report Posted February 2, 2009 i put the nut on backwards and waaalllleedddd away at it. it came out after a lil Quote
NYUK Posted February 2, 2009 Report Posted February 2, 2009 i put the nut on backwards and waaalllleedddd away at it. it came out after a lil some bolts get welded so good to the sleeve no amount of beating with a bfh will do. Quote
LS1Inferno Posted February 2, 2009 Report Posted February 2, 2009 some bolts get welded so good to the sleeve no amount of beating with a bfh will do. mine did that. i ended up using a drill and drilling the headed end out enough tolet it slip past the frame. mine was rusted stuck to the collar it was one piece. Quote
Pyrojunky619 Posted February 2, 2009 Report Posted February 2, 2009 I guess i had a easy one, just soaked it with PB'laster over night an the nest morning it came out, you can get that a try before cutting it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.