lunatic Posted September 16, 2008 Report Posted September 16, 2008 (edited) What hangers do you guys like? I go through a set of stockers about every 2yrs and im wanting more bling with dampening properties. Edited September 16, 2008 by lunatic Quote
KlotzBanshee Posted September 16, 2008 Report Posted September 16, 2008 I don't know about the best but I like the RIS Designs billet hangers, I found my pipes actually fit better with them over the stockers. ...But, they hold them pretty solid and do not have any rubber cushions which some guys will tell you is bad. I guess if the welds on your pipes are shitty then you might want some rubber absorbers? I've had them for three years with no problems, plus they look sweet. :cool: Quote
jbooker82 Posted September 16, 2008 Report Posted September 16, 2008 I run some TM Designe works on my CPI"s. They have a rubber bushing inbetween the halfs and they also swivel around. Not much bling but tm doesnt make bling a priority over functionality. Quote
Ben350 Posted September 16, 2008 Report Posted September 16, 2008 i just bought a set of these for my CPIs, cascade innovations hangers, look good, still have the rubber damper, and the screws to reinforce the damper. Supposed to be good.I will find out http://67.199.65.66/cascade_innovations/ne...tore_dept_id=17 those TM design ones look cool, how much were they? Quote
travis6767 Posted September 16, 2008 Report Posted September 16, 2008 i have had the tm design for about 3 or 4 years and no problems at all still tight and look nice on the bike Quote
jbooker82 Posted September 16, 2008 Report Posted September 16, 2008 those TM design ones look cool, how much were they? $60 Bucks http://www.tmdesignworks.com/xcart/custome...=299&page=1 Quote
LiftdT4R Posted September 17, 2008 Report Posted September 17, 2008 $60 Buckshttp://www.tmdesignworks.com/xcart/custome...=299&page=1 330271310121 I got a pair on ebay in great shape for half that price shipped. Quote
xXBlessedWithDeathXx Posted September 17, 2008 Report Posted September 17, 2008 330271310121 I got a pair on ebay in great shape for half that price shipped. i also got a set like that off ebay for $34 i think i payed. the bolt in the middle is aluminum and it broke about 3 miles from the house. the pipe was hanging outward and very loose. it was only held on by the springs and silencer pipe but i got her home ok. a very nice hanger but the alum bolt/nut has to go. Quote
jbooker82 Posted September 17, 2008 Report Posted September 17, 2008 i also got a set like that off ebay for $34 i think i payed. the bolt in the middle is aluminum and it broke about 3 miles from the house. the pipe was hanging outward and very loose. it was only held on by the springs and silencer pipe but i got her home ok. a very nice hanger but the alum bolt/nut has to go. Did you buy them new? Mine have a stainless steel screw with a stainless lock nut. I havent had a problem with mine. josh Quote
FireHead Posted September 17, 2008 Report Posted September 17, 2008 i just bought a set of these for my CPIs, cascade innovations hangers, look good, still have the rubber damper, and the screws to reinforce the damper. Supposed to be good.I will find outhttp://67.199.65.66/cascade_innovations/ne...tore_dept_id=17 those TM design ones look cool, how much were they? I run the ones from Cascade. They are the best I have found so far. :thumbsup: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.