locogato11283

try 50 pilots.

How long did it take you to get that right??? umm i think it was first try.

ive got 180 pounds. still got the bog, but mine has a spacer plate. maybe thats what our problem is?? im runnin 35mm pwk, v force, boss intake, rocket pipes. jetting at 175 mains, 50 pilot and needle who knows where. it runs the same no matter where the needle is.

yep. you are taking on coolant somewhere.

too rich. whats your jetting at???

i start tomorrow

mine is never down unless im upgrading.

same here. i lose sleep at night fo sho.

no problem. anyone else want one??? they sure do make it much easier to get to your plugs. i can buy a few cheap wrenches and what not and send them out to people. just need money for the wrench and shipping. aaannnd maybe a little for myself

seriously, how do you? ive got a 13/16 inch wrench i bent about 4 different directions so that it fits right up underneath the pipe. works perfect.

my banshee with inframe rockets.

why did they take it apart 2 times? so they took it apart and couldnt find anything wrong and then put it back together, then took it apart again? thats the stupidest thing ive ever heard. sounds to me like they are some idiots and dont have a clue whats going on. even if they couldnt find something wrong they should have notified you before tearing it apart the second time. id call the bank and have the check cancelled if you wrote a check. if you paid in cash id take something of their worth 250 bucks

yep, id say so.

exactly. mines doing this shit exactly. ok i tried the leaner needles tonight and it ran like dog shit. i tried center and needle all the way up and it was running like poop. i ended up going back to whatever comes in the 35mm carbs. i have the richer needles but i dont think thats what it is. its gotta be rich. its not popping, just kinda a bogging hesitation deal until it comes back on. seems like everyone that has the 12 port around me is having this problem. ive had the needles all over and cant figure it out. im wondering maybe if its the humidity??? could that be it?? f*ck i dont know, im about out of ideas.

rockets kick ass

id try 172 mains, 50 pilot and needle in the middle. that should be real close.

yes, get some keihins i dont know shit about mikunis.

pictures. we need pictures

damn. for 700 bucks id buy a couple of them. you got a hell of a deal.

no. you will have to jet up. simply adding the v force will need rejetting. id do all the mods and jet up a few sizes. if you dont have a good air filter the v force arent gonna do you that much good. theyll only flow as much air as you can get to them. so while you are doing those go ahead and change the filter. what is your sea level and we can get you close to what your jetting needs to be.

you shouldnt have any problem. i recently got a set of 22" 4 snows and im takin off in the tacky dirt in 2nd with no problems. its spinning them like they arent even there with 16/41 gearing. with 17/41 gearing mine will spin 20" fast trekkers on the pavement with stock length swinger. what is your jetting at right now and what sea level? im at 1000 feet above. 50 pilot, needle all the way up, 175 mains. the needle isnt right but it runs the same no matter where its at.

youve got a passion engine. gear up homie. i ran a hillclimb with 17/41 gearing with no trouble. try at least a 16 up front. the lower you go with this engine the worse it runs. id try 16 and you might need a 17.

about the only thing i can freehand draw well is cats. go figure. ive designed 3 houses now, one of which im living in. i havent done any on cad, all of mine are hand drawn and in great detail. i think everyone should learn to draw first by hand, then move to cad if needed. drawing by hand really teaches you patience and how to make things look right. i wish some of the idiot architects that i get plans from when putting in foundations had some hand drawing experience. they wouldnt do half the stupid shit they do if they did.

sounds like ny sucks.