locogato11283

I’d check compression first. If it has 120+, it should start pretty easily. Below that and you’ll be kicking it more. Below 100 is rebuild time. Then, if compression checks out, pull the carbs and clean them completely, jets, passages and all. Also post what jets are in it so we can determine if it’s close or not.

Stress induced heart attack and you're moving you CA? Seems like an illogical move to me.

Haha, it's worth a shot.

Coop, here's a link to the heim spacers.. https://www.hygearsuspension.com/collections/fox-heim-bearings/products/fox-atv-heavy-duty-heim-reducer-kit-9-16-bearing You will want 9/16" bearing, 10mm hole and 1.25" for the mounting width.

Looks good. I have a Podium on order too for the 06SE bike.. I've been waiting on it since January I think. Slow ass MFers. I wouldn't hesitate to start working on that chassis. Everything you have is high quality and will fit perfectly.

Just email LSR. They probably have them in stock.

$700 I think.

Not all hand coned pipes work. Many of the ones you see now have had several revisions to get them to where they are. The software gets close, but isn’t always right on the money.

I believe you’re correct. The Snipers are no joke. They work very well on a wide variety of motors.

They do have more character.

Picture?

Yes. Every single one of them.

There's probably only 5 people or less here that have hand coned pipes at all.. I have three sets of LED, two out-frame and the very first set of in-frame DM pipes. And then the out-frame KR pipes. I would say they only real Banshee pipe builders to trust with hand coned are KR, LED and SCP. I'm sure the rest can build them, but they won't be up there with these three as thy have time in the R&D.

Exactly.

Is there any reason you’d want to go there anyway? I picture the country full of Jesses and Claudes. That’s not somewhere I’d want to be.

Fucking engineers.

$10 says I get some of those when he sends my 4mm motor back to me.

Just snug the head nuts up a little more. If it’s a billet head and you torqued to 22 foot pounds, that’s likely your issue.

No bueno.

I’ll change it for him ASAP.

Put a 60 pilot in. I bet it fires right up.

Don’t forget Wicked ATV. Roger makes some really cool stuff.

What's the jetting? It sounds like what this 4mm Wampus I have was doing.. I ended up with a 62 pilot that solved all my issues.