GleasmJA

I'm looking for carb boots for 33-35mm carbs to a stock style airbox. Anyone know who makes a good set??? Thanks Jon

Not trying to middle you out!! We both must have contacted him at the same time. I'm in the middle of the ocean with less then 56k internet speed, so keeping contact is a pain in the ass. But they are all yours fi you want them. I'll look else were.

Nasty, I can't call. I'm in the middle of the ocean. I'm in the Navy coming home from an underway period. The best outside contact i have is e-mail (which is backed up now), or very slow internet. Right now the interent is beating e-mail. I'd like to get these rims off from you. Gleasman

Nasty, PM me here please. Seems that my e-mail exchange is backed up and might be quicker to get your response here. I'd PM you, but my work internet won't allow the pop-up window for PM's to come up. THanks, gleasmja

nastyracing, I sent you an e-mail the other day with no response. I'm looking forward to your response for further transactions to take place. gleasmja

I too would also like to know of any areas that you find to ride. I've got one place that a buddy and I ride, but it'snot the most legal place to ride untill we find the owner to ask for permission. I've heard of a few ATV or Off road parks, but haven't been to any of them yet. Your basic pay by day or weekend places. One is something like East Coast RV?? I've got the link saved on my home pc, but it's in souther georgia about 1.5 hrs from jacksonville. Keep us posted if anyone finds something.

thanks for looking.... but someone all ready stepped up to the plate and delivered all ready. Jon

I need a set of stock bore and unported jugs for my 4mil build. I recently had a set and sent them off to get done but they weren't bored center in the jugs so they were not usable. SO i'm back on the hunt. I'm pressed for time so let me know if you have anything. I'm leaving this week for deployment for two months and wasnted to get the work done while i was gone. txt me at 717-552-4254 with pics or details email [email protected] Thanks, Jon

Magnets till attracted the wood-ruff key when i pulled it off. So i don't beleive so????

pick up gap checked and and was .019......

Test the whole coil on another shee.... worked fine Tested kill switch and key... both work fine. Just happened out of the blue while riding. I don't have a ground anywhere that it shouldn't be that i have tested yet.... Dreading having to pull the wiring harness and test it all out.

I've lost spark and can't find the culprit that is causing this. I've swapped the CDI with a known good. Tested my coil on the same shee that i got the CDI -tested good and just installed a new stator and pick-up. STILL NOTHING. The weird thing is..... if it sits for a while and i look at the plugs when i first kick it over, i see about one spark and then it goes away. Anyone see something like this before?????

I've contacted him.... Thanks

TXT me your paypal... and i'll send payment today for the stator. I was looking for one. PM you my number

sold the part i wanted.... thanks though

Looking for a good working stator and pick-up for a '94. That's the old style round connector, but if you have a new style and looking to off load it i'll consider it for the right price. Thanks Jon

UPDATE........ SO I've tested my coil on another bike, starts the other bike just fine. Used the CDI off the other shee to test on mine and nothing. I'm going to dig into the stator area to check my pickup gap. Just looking to see if anyone had other ideas. Thanks Jon

What kind of signal i'm i looking for there?? I'm an an electronics guy and have access to cool test equipment. I tested it with a multimeter in AC and DC. I saw it jump up from 0, but it isn't a steady signal so i didn't expect to get a actual reading. But i can say that something was getting to the coil at least.

Can you check the voltage coming to the coil at the orange and black wires?? I want to make sure sure i'm getting votage there.. Thanks Background..... Riding all day just fine. Went to leave and riding along hard and it just dies. No spark now. Thanks.

willing to sell them outright?? If you are PM with a price. I'm very interested.

My buddy bought one.... it looks just like my toomey one. He hasn't ran his yet, still in the rebuild process. But it looks pretty good and solid.

Not a native... but up in Jax here. My buddy is also on here somewhere.

i'm interested..... just like stated though, i'd like to see some pics.

[email protected]

Interested in your carbs.... post your pics. or send them. [email protected]