B.b.p builders

Gold? As in stock warrior rims?

Sold

Good luck on the sales Matt! I want that billet water pump cover

Swing arm sold A arms sold

Chrome lonestar -1 swing arms still available Lonestar a arms still available Hydrolic clutch still available

Pm replied

Preferred black, and drag cut. But not a deal breaker if they are not. Need these ASAP please let me know what You have, bought a set of tires and rims but rims are junk, to many dents won't hold air, got a race comeing up in a cpl weeks I need these to ship out very soon.

Stock trans, tricked. Can you explain to me the benifit if haveing a modified trans on a play bike? I honestly have had many banshees over the years, really didn't have any problems with the transmission in the stock form. I can see an override on a drag bike. Also what do they do to the trans on a play bike like say for example a camatv trans, what is the benifit. Hell I have bent way more shif forks in my mx days when I raced mx dirt bikes. Never had a problem with a banshee trans till I got my drag bike, and I swear that trans was already toast when I got it!

Ya brutal! But it's pulling pretty good now! Jetting was way off, powervalves were plugged and one was not even connected, as in the bolt that holds the valve came lose, so guaranteed the piston must have some marks on it, these motors can take a bearing! This guy had someone put this kit on who had no clue, he rode it all summer didn't maintain it once! Didn't even wash it once! Shit I didn't even know the rear swing arm was chrome till I got home!Power transition is awesome! I like it! Can't wait to port it! 421 pv cheetah great play bike! Can't wait to build it, next season will be fun!

Looking for ideas, some of you know I just picked up that 421 pv cheetah bike. That I'm parting in the for sale section. I already own a drag bike that I am very happy with and still needs tons of seat time on the track, but I miss having a bike to play on, can't really just fire up the methanol drag bike and go for a cruise whenever I feel like it, have to purge it after, and it's set up to run 300'. So Im thinking about turning this 421 cheetah into a nice play bike. But a very nice play bike ! Want it ported want to keep the pv in it, but I also want it to perform in a Drag race also. I will say this, this bike is shit rite now! Motor is a dog, running way rich, pv are probably plugged up, shit my stock cyl. With stock stroke, with a trail port pulled harder then this 421 cheetah!! Seriously! Toss out some ideas, swing arm length, porting ideas(I want it to have as much power as posable) Can a guy run methanol in a play bike, and the bike still be reliable like race gas? Cause I have a shit ton of meth I need to burn! I have a frame I'm going to cut up and make lighter, also a sub frame for it as well. Rear MS hill shooter, and a set of works shocks for the front. WNt some in frame pipes, not sure if type, but not the fmf a that are on it, I'm sure it could perform better with a better pipe?

Also magura hydrolic clutch set up. Hole set up, lever, perch, line and slave, all that's needed, works great! This bike has full high pressure springs, feel nothing when pulling the clutch, good thing to use on a trail bike that u don't want to use a lock up on, stiff clutch springs will hold your clutch, but no stiff pull! I like it and I am still unsure where I'm going with this new build yet, so if someone wants it for 180$ shipped they can have it, if not I'm more then happy to keep it for now. I have seen them listed for 260-320$ +shipping new.

Yes , a very happy guy, lol. Elkas are like gold around here!

A arms also include the ext. Braided break line for the $300 shipped. Can also sell the front hubs, and rotors as well for a bit extra. Thanks

Picked up this bike today new prices now that I have had a good chance to look things over, and I will get pics up soon Chrome lsr rear swing arm -1 350$ shipped with good bearings Lsr a arms +2+2 good ball joints, they also have adjustable heims where they meet the frame, and billet threaded rod for upper rod connection to frame, a arms, all lsr hardware and tie rods all in good shape I want 300$ shipped Axle sold Suspension sold Carbs trade pending Nerf bars sold Parts I need and willing to trade for Pingle Ext. Swing arm, let me know what u got Lectron carbs 38mm with cable. Chain tensioner Stator cover(stylish billet one) or even better a chariot 3 piece with bearing support Drag axle 40mm 40 mm axle houseing If you have any of these parts and want to make a trade let me know, you have any of these parts to sell, still let me know, cause may just buy them if cash is flowing and available. Thanks Texting works or pm 289-716/0613

Set of blue rear full bore fenders, very nice shape, only the rear fenders available , keeping the hood for myself. 150+shipping From what I understand these are no longer even available to buy new.

Did these sell yet? I'm wondering

It's sandy clay, type material, I'm going to run it a bunch this weekend, try and get the bike set up better, tuning and what not. Won't have my tractor for a cpl. Weeks.

Looking to buy a set of +3 forward -1 wide (stock width also considered) drag arms. Let me know what you have with pics please Thanks.

Contact me if it does not go through, please I didn't realize this was old, I'm guessing it's sold.

To everyone interested in these parts, good chance I will have them a week early. As in this Friday, ready for pics Saturday, ready to ship Monday. Pm sent on silencers and clamps

Does a arched swing arm actually help with traction? I'm finding mixed answers, I'm reading that some say it can but most stuff I'm reading say it's just for show?

Just outside of Toronto, Toronto is 40min. From my house.

It doesn't sag with me on it, but the shocks I just got back from MS and had them totally redone. So he seems to out a little geese on the seals so I can see movement, shocks moved about an 1" in total from the runs I did. So really I should lower the bike even more eh? It's almost going to be on the ground? So should the bike sit level? Or front higher? Also what about a arched swing arm? Would that benifit me? What is the purpose of an arched arm? My logical guess is the arch is to help transfer the weight, and that it would benifit me?

Ya she is a little trooper! I got no one else around here who seems to want to get involved. Plus she likes me racing. When I use to race mx(dirt bike) she was always rite there pushing me! Best little helper, need a wrench, need something fast to get ready for the next race rite there getting it, even when I'm yelling at the top of my lungs to hurry the fuck up. Lol, she likes the mx better, but is warming up to the drag racing!! Now that I have the track I can get her on the stop watch testing my 60's and my times period. It would be nice to have other guys with quads involved, for the competition push of it, but it's also great to be able to do it with the wife aswell.

But the track is already made, it's just packed, only needs the top 3 " ripped up, I'm sure a box grader will do perfect, yes I agree that would of worked great to first rip the field up before cutting a lane, but the situation I'm in now not necessary, plus I don't have a dozer, or the fund to get one, or I wouldn't even be I this shitty situation