B.b.p builders

Yes I could send a cable with them if buyer needs it.

For the past few weeks I have been looking for information about running nitrous. I have found bits here and there, I also did a few searches here and didn't find much at all here on bhq. I just picked up a kit for my cheetah. Thought it would be great if there was a good NOSS thread, here on bhq, filled with all the ins and outs about running nitrous on our banshees. Maybe some installation pics too? Here are a few of the main things I'm wondering about, but really am hoping guys will fill this thread with everything a guy should know about running nitrous on a banshee. I'm running v-force reeds, from what I'm learning the nitrous will freeze the carbon reeds and is very hard on them, if they will even last a cpl. Passes is something I am getting mixed information about, but majority of what I'm reading says they are no good for noss. What I want to do is spray after the reeds? But just after the reeds. Has anyone had experience with this? This is something I am getting mixed information about also, I read it's fine, but I also read that the pressure from the noss spray after the reeds can cause the reeds to not work properly? I'm really interested in seeing some pics of installs after the reeds, and hearing from guys who have done this. Wot switch installs would be great to see also. I couldn't find any "great" wot switches, great as in something that fit inside the thumb throttle. Is this out there? I picked up a boss noss kit, it seems to have mixed reviews, but it also seems to me, to be the easiest kit available, I'm running methanol, from my research thus far, plan to run mixed race gas as my enrichment fuel. I plan to run a 30 total shot.

If you have a set of skat trak terrains you would like to sell, or trade, please pm me with details of them. Got a set of 40/38 Packard alky lectrons I could trade, or a Set of shearer chrome, big bore, in frame pipes, silencers, and billet pipe clamps(used less hen a handful of times) Bunch of other parts, or cash, I would much rather a trade.

Yes all 3 shocks are still available

Looking for a set of these, cheetah, not DM. Chariot makes a specific set of intakes that are for 44-48 carbs, these are the ones I am looking for. I have a set of chariot billet cheetah intakes, for 36-41 carbs for trade or sell? They have been ran once. Please send PM

Still available These carbs are no longer being sold with the Packard billet bowls, they are being sold with k&t billet bowls instead. And will be sold as pickured bellow 40/38 Packard alky carbs

What does full bore sell a new hood for? Just curious what used value should be now that they are back?

The Marvin has 900 psi and 150cc of oil in it. I bought it new, specs I gave when ordered are 12 over swing arm, no link 160lbs. Rider I don't have any close ups, I use a iPhone cam, or iPad for pics. I used the Marvin, for maybe 3-5 300' races, while my comps were being rebuilt, I bought it for a second build I was planning. The works shocks, I never used, I bought them for this same build, from a good guy here on bhq, named jayhawk. I have delt with him on a few items, and never have been disappointed, he might know more about them, he is a good guy and I'm sure he wouldn't mind if he was pm'd for info on them. He had them on what looked like a dune play bike.

Yes

Yes that worked for me, when I had problems with front end lift, I was not parallel, I lowered front till a arms were paralle, then measured, did the same with the swing arm. Had shocks/struts built to that size, Bike still lifted, but not to the 12oclck position, not to the point where, I had to let off the throttle. I also am limited in my knowledge, but been through this exact problem, and this worked for me. But a wheelie bar is the only sure bet!

I have had the same problem, I lowered my bike and it helped, like u would not believe. Put it low, like the bike above, it worked for me.

How long are these?

What horrible timing!

Stock flange.

I forgot to mention these are 40/38 lectrons. Not 40/40

Pics don't do these pipes any justice, nice pipes, shitty pics

^^^^ yep

40mm lectron Packard carbs, with Packard bowls. Set up for alky, still on the bike, cause my new ones are in the mail, if they sell. Befor new ones arrive, I will take them off, box them and ship them within a cpl days. Great set of carbs, selling only cause I bought a bigger set.. 550$ shipped

Pingle tether kill switch, seen them listed on pingle site for 95$ would look great polished 55$ shipped Drag cut harness, has plug wired to plug direct to work with pingle above 40$ shipped

Set of works front shocks, 13" long 225$ shipped Rear Marvin hill shooter 13 1/4" with nut off, I bought this new, used it twice. Pretty much brand new. 225$ shipped

Sold

Titanium rods with aluminum rod ends. One rod has a small dent (pictured) Looking to get $75 shipped.

Looking to move these, any reasonable offers, these are as close to brand new as u can get,

450 shipped? I'm looking to move these, want to free up the $ for use on needed parts.