Jump to content

BeeCanBanshee

Members
 View Profile  See their activity

  • Posts

    715

  • Joined

  • Last visited

 Content Type 

Everything posted by BeeCanBanshee

  1. BeeCanBanshee
    Front wheels and tires? And a price for rear wheels also no tires. Pm me
  2. BeeCanBanshee
    What year are the rims from? Have tires?
  3. BeeCanBanshee
    Bump
  4. BeeCanBanshee
    Bump
  5. BeeCanBanshee
    My jetting was 190 main 48 pilot dek needle on middle clip.
  6. BeeCanBanshee
    I have a used good condition oversized Toomey super cooler radiator all specs are on there website. They go for 400$ New I am looking for 225 shipped. Thanks this is the only pic I have at the moment http://m1311.photobucket.com/albumview/albums/lowery_3/IMAG0143_zpsaf53bdd7.jpg.html
  7. BeeCanBanshee
    Ok thanks I don't run headlights so I don't have my regulator on. But thanks guys.
  8. BeeCanBanshee
    Had my frame pc'd and want to male sure I have my ground contact areas clean anyone know off the top of there head? Does the coil ground through the mounting bracket? Only thing I have mounted so far.
  9. BeeCanBanshee
    http://m1311.photobucket.com/albums/lowery_3?newest=1 Top 3 should be the transfers. I don't know how they run yet but hopefully better than unported
  10. BeeCanBanshee
    I love my banshee. I had a 4stroke and I liked it to but its no banshee. I do want another 4stroke though for riding rocky and muddy trails. My shee is for drag strip, open roads and sand. Spending to much time and money on a frame up just to go through mud.
  11. BeeCanBanshee
    After you buy your timing plate just search for how to install. Like zilla said its very easy. USE THE RIGHT TOOLS. Right tools make it easy and smooth. If you have they money do both at the same time. But the cool head is a little expensive if you buy new. But you could fine a used one for around 150.
  12. BeeCanBanshee
    Advance your timing good bang for the buck. +4 is what most do.
  13. BeeCanBanshee
    I will post transfer pics as soon as possible.
  14. BeeCanBanshee
    Can someone post a link for a degree wheel and how to properly measure floors and cieclings? I now how to search but with there being so much junk on the internet and not knowing what's the proper way I don't want to search and find improper methods.
  15. BeeCanBanshee
    Ok cool. Yea I started comparing mine to port job pictures I've seen around and they didn't look like any. Glad its decent and leaves room for more work.
  16. BeeCanBanshee
    And how.do you get accurate measurements? My Mic won't fit.in the cyl.
  17. BeeCanBanshee
    Sorry for being a dumbass but.where are the transfer ports. Sides of cyl skirt on bottom?
  18. BeeCanBanshee
    http://s1311.beta.photobucket.com/user/lowery_3/media/flywheel/cylinders/IMAG0154_zpse25fae4a.jpg.html?sort=3&o=0#/user/lowery_3/media/flywheel/cylinders/IMAG0154_zpse25fae4a.jpg.html?sort=3&o=0&_suid=136098773150209927427507936954
  19. BeeCanBanshee
    Damn it.I hate my phone. Stand by
  20. BeeCanBanshee
    http://s1311.beta.photobucket.com/user/lowery_3/library/flywheel/basket
  21. BeeCanBanshee
    So I picked up these cyl's a while back cause mine were shit. The guy didn't know who ported them so I'm turningto you guys just wanna know what type of port this is if any, is a decent job and if they look Luke crap can it be reworked or is it to far gone. http://s1311.beta.photobucket.com/user/lowery_3/library/
  22. BeeCanBanshee
    Some groves on the basket. Not bad imo. Came off running bike. All other parts are in excellent condition. Gear is tight on basket. Screws are not stripped.
  23. BeeCanBanshee
    http://m1311.photobucket.com/albumview/albums/lowery_3/IMAG0129_zpse0450c92.jpg.html Basket,pp,boss,screws and 3 OEM springs and 3 HD springs. 75$ shipped
  24. BeeCanBanshee
    Oh and we didn't pull it with a jaw type. He tried but once he saw it putting dents in it he stoped and waited for the right to to come in the mail.
  25. BeeCanBanshee
    No the dents ate just where the pics are. The non dented area measures at 1.68mm and the dented area was 1.66mm just a little more info but thanks guys for the good news.

BHQ Quick Links

×
×
  • Create New...