Jump to content

Surfrjag

HQ Premium Member
 View Profile  See their activity

  • Posts

    2,358

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Surfrjag

  1. Surfrjag
    I need 1 more flywheel and a 40mm carrier
  2. Surfrjag
    I would run it..
  3. Surfrjag
    i was there the weekend before there talkin about i beleive. my bike is quick only compared to 400ex's and raptor 350's...
  4. Surfrjag
    Sounds rich. Find out what pilot and needle are in it..
  5. Surfrjag
    F.A.S.T. sells them or wildcard racing.
  6. Surfrjag
    Ill take it if he doesnt
  7. Surfrjag
    I would look into fuel availability. Like vent cap and float height. Even petcock..
  8. Surfrjag
    Also check the gears on the clutch. I ate that one once and screwed the teeth up.
  9. Surfrjag
    I was temped to take 2mm off each side of the carrier as long as the chain lined up. Ha the axle uses threaded locknuts so i dont have to tighten onto the bearings. So maybe i dont need the center tube
  10. Surfrjag
    Thanks.. now who has a good flywheel?
  11. Surfrjag
    Yep they are. Pics in trade section
  12. Surfrjag
    Yes i talked to bobby and im waiting on an email back. Its saturday
  13. Surfrjag
    I have some bb shearers..
  14. Surfrjag
    Sounds like a good start but what needle are you using? Im about to go with a CEL and see how it does. Seems to be a popular needle for these
  15. Surfrjag
    So the bearings dont touch the seat they touch the crush tube spacer? But if you put one side bearings in all the way then that hub will touch the carrier.?
  16. Surfrjag
    There is a seat. But thanks for the idea
  17. Surfrjag
    is it oem? what reading did you get?
  18. Surfrjag
    is the tors still hooked up? did you ohm stator?
  19. Surfrjag
    distance of the bearings on the carrier is 121mm I don't know if anyone knows what 40mm vs 35mm carrier demensions are
  20. Surfrjag
    I want the jets..
  21. Surfrjag
    what he means is your carbs are probably just dirt and need a good cleaning. it must be a fluke on the oil change because it shouldn't have anything to do with how its running.
  22. Surfrjag
    so a little update.. the carrier already had 2 single bearings on each side my hub depth is 14.5mm and the carrier to bearing depth is 14.5mm so.. I don't know if its a 35mm carrier someone put 40mm bearings into or what? I did notice though that there is no spacer tube in the center between the bearings.
  23. Surfrjag
    Looking for usable parts here.. thanks!
  24. Surfrjag
    Did you check float height on the carbs?
  25. Surfrjag
    Are the carb slides backwards?

BHQ Quick Links

×
×
  • Create New...