slobanshee
-
Posts
599 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by slobanshee
-
Been there with it. just live an hour from there. Was at last hq. Was too damn ruff. Doesn't hardly wheelie at all.... 105lb female jocky and clutch tuning. Been plenty of 1.4 60s and 4.1s in 100% dune trim. But yes if clutch was to come in solid it'd be a hell of a ride lol
-
We use a +10 arm with 78RO 16 stag extemes or if sands heavy 12 rippers. Less tire is easier to clutch tune. But 60ft is worth every min of tuning
-
I got a linked +10 that's being chromed now. Should be back in a few days.
-
Would you sell rear one seperate
-
What's that bring the floats down to?
-
What arm was the rear set up for
-
I had a bad bit wollor out a dump close to that. Got it to work with a dgq needle. And 50 pilot. Was still rich but cleaned out enough to launch well
-
Better pics of stem to 918 421 1132
-
So are they for a 54 or 58mm crank??
-
Looking for a set of chrome drag a arms. -2ish width and +2ish fwd. also looking gota chrome drag 1 piece stem. Thanks!
-
Does he still do em? The few calls I've had with the fox people has been pretty useles.
-
You used one for stock length on your longer swingers? Just up the psi or change springs
-
Any links to the one ur using? I assume a linked arm?
-
Has anyone had any good or bad experiences with a rear float on a bike with a +10 or longer arm? Been running them on the front and love em vs shaws. Just didn't know if you could get the float psi high enough on an arm that long. Thanks!
-
Shearer bb in frame pipes
slobanshee replied to B.b.p builders's topic in For Sale - Parts & Accessories
Which flange -
Hell shiny is ok too. Ha
-
Looking for some sb sf stator side shearers. Raw or black is preferred. Thanks!!
-
Stock width. But very nice arms
-
Looking for some drag a arms around -2 width and +2 fwd. doesn't have to be that exactly. Thanks!
-
Only been a year
-
Dibbs on axle pending pics
-
Quote from millennium seems high. Earlier this year I broke a crank. Destroyed both sides of cyl, skirt, transfers, ect... Said they welded 11in of cracks. Which I believe. It was a nice explosion. anyway with pistons and shipping back mine was only 780.
-
The straight 14s didn't work for me. But a lot of guys use em. No two people and bikes like the same thing usually
-
What brand. Tie rods included?
-
Looking for a 26-30 inch drag axle. Lmk what ya got. Thank you.
