vbanshee

ill be looking for you guys

x2 on the whole stud thing they tend to bend like mine it was a pain to take them off but use a rubber mallet and tap it off

tors has been removed. reeds seem fine i run the vfroce 3 reeds elevation was close enough to sea level. ill dot he tests asap

ok so went to gordons bike was running pretty good. However later on I was riding it hesitates to hi the powerband not full power. Only about half the power. I replaced the top end about 5 months ago. Also the left side is smoking a little too much. Any info is good info thanks fllas

i run the billet one just to be safe if it were to melt or break. it does cool better more flow going in the motor. good investment really easy to install

damn throttle keeps sticking! heard banshees ar notorious for this... what to do to prevent it?

i run the fullflights there pretty sick for your money

oh the ressi bottle. yeah i dont run one. thanks brotha!

i will get my cap checked out... what do you mean coolant bottle? sorry im slow haha

IOk so on my bike it shoots out coolant when I'm pinning it until about 20 minutes of riding it will stop shooting out. When I'm done riding I open the top and coolant is still 90 percent full but if I let it cool for about 10 minutes and ride it the exact same way it does the exact same thing shoot out for 20 minutes then stop. I recently put in a billet water pump as well. Ny bike is not over heating which is a plus.

my money is on piston rings

hey guys so im going to the desert tomorow and would like some help... i ran my bike today ran good besides coolant is comming out of the overflow too much of it. i have a billet water pump in it however my radiator isnt in the ebst conditiion the fins are about 70 percent bent i opened the raditator top and the coolant was white foam at the top im using engine ice. thanks fellas!

get you some vforce reeds

a waste of money. i got some plus 2 a arms and i love them! your just going to sit wider not geting any more travel

done it plenty of times no problems in doing it

im at gordons that weekend ill be at glamis 2 weekends later

lol thats funny

Hey fellas so my shee has been starting to heat up a little too much so time to switch to a nice billet one. So the question is what kind? I DO. Want to get one from one of the HQ sponsors. My shee is a 65 mm bore with vfoce 3 reed and a cool head with 19 cc domes. Do I get the standard billet kindthat u just hook up or I heard there's another one the high flow kind. And are these hard to install thanks guys

Hey fellas so my shee has been starting to heat up a little too much so time to switch to a nice billet one. So the question is what kind? I DO. Want to get one from one of the HQ sponsors. My shee is a 65 mm bore with vfoce 3 reed and a cool head with 19 cc domes. Do I get the standard billet kindthat u just hook up or I heard there's another one the high flow kind. And are these hard to install thanks guys

chris your a genius

Hey fellas so I went riding yesterday and my bike is getting too hot coolant keeps comming thru the oeverflow not like a sink but enough to make me worry.. my radiator is from a 2003 and I use maxima coolanol coolant 50/50 my guess is that the radiator is all gummed up either need a new radiator or flush it completley? Any ideas? Thanks guys and remember keep beating those 4 strokes

sundhal frames are by far the sickest things in the world

selling some red banshee shocks comming off a 2003 in good cond. 50 bucks to your door. thanks fellas

sorry i wasnt on last nigth chris. yeah they are re torqued. it seems like a bad gasket maybe. when its on it doesnt leak but about 5 minutes after it will start to leak

its leaking right in between the cylinder and cases where they connect