n2otoofast4u

I crammed 18spi of boost and some nitrous to a stock crank in my 350. It live for quite some time and it ended up twisting the center section but all else was good.

HOLLY SHIT LOOK WHO IT IS!!!!!

<br /><br />Sometimes if a burn down happens the walls don't get hurt, it will just leave aulm in the bore which can be removed a few ways. If it did infact hurt the cyld wall you will need to have them replated.

You must have a notcher. If not those are some nice hand notches.

<br /><br />YRSFOS

6-8 kold kutter screws drilled into the top of them.

Open photo bucket in your mobile. Click share or menu/links then click img. It will copy or hold and copy, then paste in here.

WAIT...... So you ARE going to the BHQLSOKMSS this coming year?

A for effort for sure! A few years back DMR acquired some pipe building software and he built several sets of pipes using a few different values. One set he built looked VERY similar to yours. He also used stainless and polished them when done. They looked good.

Building snomo bikes is not rocket science. With two clues and a tape measure you can get yourself hooked up pretty easily. Just sayin.

What all are you looking to replace? Remember, your building a bike not a bridge!

Thanks for telling us.

Cross tube in?

<br /><br />Who did you select as your builder?

Must run!

I see carnage or fouled plugs. Only one thing worse than buying used carbs. Buying non matching used carbs. Brilliant!

Its fucked. BFH and a pry bar!

<br /><br />^ this!!<br /><br />If you think the manual costs too much then you need to better your financial situation WELL before buying any sort of toy!

Is the crank billet?

Brilliance

Rod bearings? Why the fuck would a top end setup have rod bearings included? They go on the crank.

Did he say "a couple feet"????

Do you know what a jackshaft is? (directed at the OP)

Here we go (again) EDIT- I had a well written long explanation of why I think that these should be implemented, but its was just a long windy like post that would have zero impact on the outcome (much like voting for a president) Facts are facts! Lawnmower racing has more structure, more television exposure, and more corporate sponsorship and backing than the sand drags do. If these people think its ok to spend 10-100k a year for a hobby than more power to them. I will not drive clear across the fucking country to race at a glorified hillbilly reunion. Side note. You guys can have all the weight rules you want. When someone PILES it up at one of these big races and sustains life ending or changing injury right in front of peoples fucking faces. Maybe then, just then, some of the other issues that need to be addressed will get looked at. Ignorance is great, right until you say goodbye to a friend as you load them into an ambulance with the thought you wont see them again. Good luck, fuck it. IM OUT.

Do I get to join this debate?