So Cal Suspension

Gleny, take a wider pic so I can see all the wires coming out of the stator, and all of the wires from the reg/rec. I just spent the last 15 minutes doing a writeup for you, but then I realized that I don't see all of the wires.

That other fuckin' thread has been at the top of the new topics section for the past two days, and when Dave replied to this, the thread I mentioned was two below this one.

Damn... what happens if you guys ride really late at night? Gotta load up when you're done and split? or are there campgrounds that you can ride your bike to?

Can you tow toy haulers and stuff onto the sand? or do you have to camp offsite somewhere and park in the parking lot?

What is all this shit about vouchers, parking lots, and pits all about? Don't you guys just pull up to an empty spot, unload, set up camp, and ride?

Perhaps you didn't see the ridiculous thread irondildo started below this one.

You can go to photobucket.com and sign up for a free account. They let you upload any image size, and you just copy/paste the code in here. Wallah! Pictures.

40 views isn't much, however, try to use some more punctuation next time. It's VERY hard to read, and honestly, the majority of us skip right over threads like this for that reason. I know I looked at it about 3 minutes after you posted, and closed the thread. It just makes things REALLY hard to read when there is absolutely no punctuation anywhere in the post. If I understand your post correctly, you're covering up a lean pilot jet by moving your needles. 270-290, 27.5, middle clip on STOCK needles, 1.5 turns out on the air screw.

Dave doesn't know how to read. This guy was thanking ironman for his premature negative feedback post located here. http://bansheehq.com/forums/index.php?showtopic=158569&pid=1383967&st=15entry1383967 Both this OP and Ironman apparently did not realize there was a feedback forum, and decided to start off-topic conversation in the For Sale section.

Sweet lookin works shocks on the purple bike.

and a v8 for "hauling capabilities"... but "The most it will haul is a couple of shee's on a trailer."

Any standard length shock. 14 5/8" - 15" eye to eye

He's still my favorite. He'd probably still beat all of these UFC "fighters" in his current state.

OHHH YEAHHHHHH!

This is my favorite UFC "fighter"

When WWE and UFC share "fighters", it should be a dead giveaway that UFC is fake. Good Ol' cock chest going back and forth. 13 year olds think WWE is real, too.

The spring can be removed, but the shock cannot be taken apart. They are non serviceable. I the shock is binding through the travel, it's possibly bent. He's the catch though. If the shock is bent, what happened to it that caused it to bend? Odds are if your shock shaft is bent, something else is bent. I VERY RARELY see a shock come in that is bent to the point of binding, without of significant damage elsewhere on the bike. If you have a small body spring compressor, that's your best bet to remove the spring. 99% of people don't have one, though. Honestly, your best bet is to find someone on here with a mint set of OEM shocks... odds are good that you'll find someone who will practically give them away. They're not worth anything... literally, nothing.

First off, you fuckers claiming to be a cheese boy need to back the fuck off... Second, 350scab, I thought you did a pretty good job porting your cylinders in the other thread. Do what you want, man. If it doesn't work, it doesn't work. Who the fuck cares. It's your money, not theirs. There have been TONS of people who home port their cylinders. I'm sure all these "builders" ported their first set of cylinders as a professional. Get fuckin' real, people. Dude's in South Africa and wants to give it a go, let him. If you don't have any advice keep your dick suckers quiet.

UFC is just as fake as WWE.

Definitely you could run them on stock a-arms. Any aftermarket a-arm that specifies they are built for a "stock length shock", those shocks will work on.

Most +2 arms use stock length shocks, they just use different valving and springs.

I have a bunch on order. They should be here on Friday hopefully. I'm heading to the shop in a little bit. I'll check when I get there, I might have a few still. How many do you want?

Send a PM to JD, 87sheerips. I gave him a bunch of silicone rubbers that should work for those. Maybe ask nicely and if he's got any left he might share them.

Haha, probably the best one to date.

My vote goes for the PA Fucks on their own turf, obviously. I'm a sand guy, but I know it would take more sKILLs and brass balls to climb those hills. The reason I made the thread "Bro Crew vs PA Fucks" is because both Bro Crew, and PA Fucks are gay names. Figured I'd leave it an even playing field.