shawn941

i hear ya man,,when i lived in south carolina i bought a house out in the boonies and they were corrupt too. i passed a car on my other banshee on my street and was puttin it in the shed and looked back to see a cop in my driveway,,,he didnt impound it but gave me a $679 ticket! i went to court to pay it and there were dudes in there that had gotton busted for crack like 6 times,,,all they did was fine them. moved back to indiana and my buddy called me sayin the mayer got busted for embezzlement or some shit and they didnt have a police dept for like a year,,,lmao,,,fired all the cops! great ridin down there tho,,,not here

they dont leak unless i tip the bike on the grab bar to load it in the truck,,i need to order one,,,,

you said an anonymous caller called the police,then 20 minutes later they showed up,,,how would you know what time the anonymous caller called???

how much do they want for them?

man dude,,that sucks. thats what i say,,call a lawyer. they didnt try to harass you thinking you were the one on it?

so i just figured out the valve in my stock petcock is not working. it turns kinda hard and i forgot to turn it on the other day and rode for like an hour,went to turn it off and noticed it was off! until i buy a new one will this hurt anything having the gas on continually? if anyones got one lemmee know or i'll just order one i guess,,,thanx in advance for any replies

sorry,,,that was fuked up,,,,,i just bought one of them xena's on ebay,,$38.99 free shipping. they are factory rejects,,only chips and scratches to the paint,brand new,,,battery and all, they r regular like $75... he had 4 when i saw it,,,i ordered 10 minutes later after looking at more and he only had 2 left,,,now 1,,,its a good deal

definately dont get stock pipes,,,if it has a cool head chances are it has other mods

i realize that,,,lol,but if you read the original post,,the guy told me it had a 410 stroker in it,,,,im not an idiot thinkin just cause it wheelies its got a stroker,,lmfao

i didnt check the compression with wot,,,how much of a diff would this make?

lol,,,,125 psi is good for a stock head,,,,anything below 105 would constitute a top end rebuild,,,thats where i should be at with a stock head,,,any serious responces would be appreciated,,,thanx in advance,,,,,,

i know what u guys are saying about tear it apart and u will know,,,but god damn,,,, this thing launches so hard and wheelies into 4th i would think its a no-brainer,,,just wanted some opinions,,,,,,

stock gearing,,,i checked,,,the fukin thing launches in 2nd gear soo hard its unbelievable i cant keep the front end down no matter what i do,,, anyone around me wanna check it out? im in south bend indiana if anyones interested,,,if not the motor will be torn down this winter and then i will know for sure,,,jst wanted some opinions is all,,,,,thanx guys

i definately agree, at 90 psi,your in need of a new top end for sure. dont test your luck with new rings,,,it wont cost that much more to bore it and put new pistons in it,then atleast u will have piece of mind that u will be safe from blowing your motor.....

i know what your saying but my question is that i wanna know if u guys think its a stroker motor in it from what i described,,,,

i'll try to make this as short as possible,,,i bought this banshe from a used cycle shop. guy didnt know shit about the moter and said he didnt have the previous owners #. although he said it had a 410 stroker motor in it,,,thats all he knew. guy who had it didnt take care of it for shit,,,i got it on layaway and payed a bit much for it,but it was a layaway deal so i took it being short on cash. $2250 plus tax. oil was black, foam air filter was a hard piece of dirt basically,,bike started first kick tho and ran great. fmf fatty pipes,stock head,kein carbs,dont know what size,how can i tell? so anyway,,to the point of the story, i finally got some outsu stock 400ex tire, which hook great on a banshee at about 4 psi. its alot faster than my last piped banshee for a fact,,,changed oil,new k&n 2 into 1 air filter,no lid. i cant even launch this thing in 2nd without it going straight up in the air! no matter how far i lean forward( i weigh 190) it dont matter straight in the air. will whellie 3rd with no effort at all,,4th will wheelie with a little effort. so you guys think this thing has a 410 stroker or what? the motor will come apart this winter and i will know for sure just wanna ride it for the summer. oh, and, compression is at 125 psi both sides with stock heaD, trottle wasnt wot tho,,,i forgot,,,its been awhile,,,lol. what u guys think? sorry for the long post

ya,,,i wanna know the same thing. mine isnt broke but wont tighten up all the way on the shaft,,,i think its one of those junk tusk shifters

gotta buy a new shift lever,,,anyone use the prodesign shifters? thinkin about the short one,,,let me know some opinions and maybe someone has a descent shifter for sale lemmee know before i dump $60 on this shifter,,,thanx in advance

cool man,,thanx for the responces. hopefully we can find out about this place and see if they are running this weekend. prolly just check it out before i take the shee up there

they drag somewhere in schoolcraft,,,does anyone know where itis at and possibly shoot me some directions?

i will be dead be fore they stop making banshee parts,,,,,,,

then he said it tops out at 150, or however fast you want it to go,,,,or some dumb ass shit like that,,,,,lol

that idiot said the banshee with the r1 motor in it wil do 92 mph in first gear,,,lmfao!!!!! did anyone not catch this????