dco3100

21x7x10

headlights - SOLD

12-42 gearing????? Thats whats killing you. Wayyyy off IMO. Id run 14-40 and run AT LEAST 44's all day. We have a stock bore stock stroke 350 pulling 14-40s and running .6's

I don't think they were originally designed for the strip, but thats the tires we all ran on asphalt in our neighborhood. They hook up quite well. The only reason im selling is because we do sand and dirt tracks now.

BUMP

Pm me on the parts you want, I am open to trades, I am needing more drag parts. Everything is in excellent condition as you can see. 06 Special Edition fenders, I dont even think there's a scratch on them! - 450 Shipped High gloss black J-arms, tierods, ball joints, dustcaps - 250 shipped Chrome a-arms, in killer condition - 450 shipped Chrome steering stem with chrome drag handlebars - 200 shipped Front rims and tires (matches rears) - 100 shipped Rear rims and tires (matches fronts)- 100 shipped Powdercoated High gloss black steering stem with clamps and bolts - 50 shipped Black radiator with hoses and clamps - 50 shipped 06 Headlights - 50 shipped Grab bar with tailight - 50 shipped Gas tank with cap and petcock - 50 shipped Chain tensioners - 15 shipped Rectifier - 20 shipped Clutch perch - 15 shipped Kill switch - 25 shipped Key switch - 25 shipped Powdercoated dust plates - 15 shipped Powdercoated front hubs with bearings, seals, and spacers - 75 shipped Powdercoated fender brackets - 20 shipped Handlebars - 25 shipped

BUMP

Paddles - SOLD

yep blue labels. 250 they're yours if you're in the us. Paypal is [email protected] Send me a pm with your shipping info

bump

No sry they went with the cylinders

75 shipped

bump

bump...

ttt, great parts looking for a new home!

Cylinders, head, crank, and filters - SOLD

An industrial grade high temp black. I actually had them sandblasted before spraying for a smoother end product and much better adhesion rather than using sandpaper. There's no major dings or dents whatsoever. Let me know if u want them I'll box em up and get em out

Clutch cover - SOLD

Im parting out some of my 06 shee, im letting go of the following: EVERY SINGLE PART IS IN EXCELLENT CONDITION,as you can see.I can combine shipping for those who want multiple items, first come first serve, that is - the first person to say or pm me about a particular item has first dibs. Powdercoated high-gloss black stock cylinders, only 20 over, trail ported by Jeff @ fast racing just 3 months ago, along with a fresh bore and brand new wiseco pistons, only has about 5hrs on the whole setup! Cylinders come with reedcages, boyesen reeds, and intake manifold. 500 shipped Milled head by Jeff, powdercoated high-gloss black. 75 shipped Crank trued and welded by Jeff as well, done the same time as cylinders, 3 months ago. 250 shipped Paul Turner Mids with silencers. 300 shipped Powdercoated high-gloss black stock swingarm, untouched.Comes with pc tensioners. 125 shipped Powdercoated sparkle silver with high-gloss clearcoat axle, with high-gloss black sprocket hub,and brake hub. Also comes with wheel hubs and high-gloss black bearing carrier with brand new bearings. 250 shipped Front and rear shocks with white springs.Rear comes with pc linkages. 175 shipped 2 sets of stock carbs, one comes with throttle cable and the other set is powdercoated sparkle silver. They both have TORS removed and idle screws installed, ready to run. 150 each Set of K&N pod filters with black outerwears, brand new for stock carbs. 50 shipped, 40 if buying a set of carbs. Powdercoated high-gloss black clutch side cover with both inserts. 50 shipped. 8paddle Skat-Trak Extreme's on polished 8x8 wheels, only used twice, still has nipples on them. 275 shipped

when you mill the head, it reduces tge volume inside of the dome area above the piston at TDC(top dead center) The reduced volume increases the compression in the chamber, this providing you with what I've noticed is better low in power/ torque as well as a snappier power-band. I went with the milled head vs the cool head because it provides the same results and you keep that "classic" stock look. When ppl see a cool head on a bike they automatically assume partial to major motor work has been done. An advantage of going with the cool head is the ability to change the domes inside, providing even more compression, bit when u go too high you have to run race fuel. Let me know if you want it, pics comin tonight

Here's my MXer

clutch cover - SOLD

Im parting out some of my 06 shee, im letting go of the following, just checking interest before they go up for auction on eBay or listed on PS: EVERY SINGLE PART IS IN EXCELLENT CONDITION, PICTURES TO COME LATER ON TONIGHT.I can combine shipping for those who want multiple items, first come first serve, that is - the first person to say or pm me about a particular item has first dibs. Powdercoated high-gloss black stock cylinders, only 20 over, trail ported by Jeff @ fast racing just 3 months ago, along with a fresh bore and brand new wiseco pistons, only has about 5hrs on the whole setup! Cylinders come with reedcages, boyesen reeds, and intake manifold. 500 shipped Milled head by Jeff, powdercoated high-gloss black. 75 shipped Crank trued and welded by Jeff as well, done the same time as cylinders, 3 months ago. 250 shipped Paul Turner Mids with silencers, professionally painted black. 300 shipped Powdercoated high-gloss black stock swingarm, untouched.Comes with pc tensioners. 125 shipped Powdercoated sparkle silver with high-gloss clearcoat axle, with high-gloss black sprocket hub,and brake hub. Also comes with wheel hubs and high-gloss black bearing carrier with brand new bearings. 250 shipped Front and rear shocks with white springs.Rear comes with pc linkages. 150 shipped 2 sets of stock carbs, one comes with throttle cable and the other set is powdercoated sparkle silver. They both have TORS removed and idle screws installed, ready to run. 150 each Set of K&N pod filters with black outerwears, brand new for stock carbs. 50 shipped, 40 if buying a set of carbs. Powdercoated high-gloss black clutch side cover with both inserts. 50 shipped. 8paddle Skat-Trak Extreme's on polished 8x8 wheels, only used twice, still has nipples on them. 275 shipped

one of my buds was having the same problem with a 5mil dm, tried everything nothing worked. Then he heard someone talking about lockout weights, so he added washers on each side of each arm on the lockout assembly and it hooked like a raped ape. Give it a try