Jump to content

BANSH-alena-jol-EE

Members
 View Profile  See their activity

  • Posts

    195

  • Joined

  • Last visited

 Content Type 

Everything posted by BANSH-alena-jol-EE

  1. BANSH-alena-jol-EE
    hello i just read a post and someone said that a drag ported banshee will not be good for trail riding, i was thinking about getting a drag/dune port job and i will also be doing alot of trail riding, first gear only stuff sometimes.......what makes the drag port difficult to ride slow haha ? seriously whats the deal-e-ooooo?
  2. BANSH-alena-jol-EE
    k, sweet, yah 2.5 seems good haha, i may play around a little more just for kicks tomorrow, but i think im gonna leave it at 2.5...the razor 2's were hooking!!!
  3. BANSH-alena-jol-EE
    well i had been meaning to check the psi for a while, and i was thinking about lowering it ....but i did read a post about psi today, if it was yours then i think u had your tires at like 1psi or lower....so yah i guess i was bored and reading ur post triggered an experiment ahah peace!
  4. BANSH-alena-jol-EE
    just changed my tire pressure from 5 pound to 2.5 and what a difference! i guess it makes sense that more traction basically equals out to more speed, instead of spinning! im gonna try it at around 1.5 - 2 pounds tomorrow and see what diff..... i still cant get over how much better shee RIPPED!!
  5. BANSH-alena-jol-EE
    opps sorry didnt see where i was posting!!!! just trying to have a little fun..no need to be hating!!!
  6. BANSH-alena-jol-EE
    i think im addicted to my banshee!!! i cant stop driving her!!!! and i love to revvvvvvvv her!!!!! make her scream like a porno star!!!!
  7. BANSH-alena-jol-EE
    ok, because mine are very loose!! didnt know what the deal was ...thanks
  8. BANSH-alena-jol-EE
    the screw on caps on top of the carburators, where the tors hooks in........should that be screwed tight or is it supposed to be loose ?
  9. BANSH-alena-jol-EE
    sst 's are top end, and they rip!!
  10. BANSH-alena-jol-EE
    im running huskavarna oil, its 2 stroke chain saw oil, seems to be running well with it, i think the bike is runnning a lil rich, the spark plugs are a dark color
  11. BANSH-alena-jol-EE
    what is the proper ratio for gas to oil, ive been mixing it slightly richer than 50: 1 for a while now, but had a friend tell me that he mixes 25:1..... WHATS THE DEAL
  12. BANSH-alena-jol-EE
    oh yah i got it took off!!!!! but i had to try it out just to see what all the hype was about lol jk, what a waste of money i could have got a 1/8 bag haahha
  13. BANSH-alena-jol-EE
    hello i just put on a boost bottle, i wasnt even going to put it on but i figured i might as well!...the bike starts, but the throttle sticks and she wont idel, also when i use the clutch once moving she shuts off?
  14. BANSH-alena-jol-EE
    hello i have my bike set up for top end power, and was thinking about getting a timing plate. Can i adjust it to suit top end? or is it just bottom end thats with the +4 i guess?
  15. BANSH-alena-jol-EE
    packing beautiful buddy!!!!!!! :biggrin:
  16. BANSH-alena-jol-EE
    i ran my bike accidentally through deep water, i guess i sucked in some water? shee wouldnt run, id pop the clutch and she would bog, but she would idel, so i let her idel for like 15 min, then she ran good again? should i just keep on going as if nothing ever happened? or is this a more serious problem?
  17. BANSH-alena-jol-EE
    i was thinking about getting porting work done, and can either stick to the stock crank and get it trued and welded or get a 4 mill crank.. what performace gains will the 4 mil give , is it worth the money?
  18. BANSH-alena-jol-EE
    i just bought a amr stage 3 rev box, never had a chance to run the bike with it yet, im not expecting anything spectacular, but what will this ignition do for me?
  19. BANSH-alena-jol-EE
    bike is making crazy sounds when im driving she will buck and it sounds like there is alot of friction and rubbing comming from the rear end?or it could be close to the front sprocket not sure where sound is comming from, i havent checked gear oil in a while, also maybe rear end needs lube bad? whats going on!!!!sound gets worse when i turn bike...
  20. BANSH-alena-jol-EE
    i cant seem to read my gear oil stick, what am i looking for, where are the marks that show the level of oil? how much and what kind of oil should i use? how often to change it?
  21. BANSH-alena-jol-EE
    Hello, I am thinking about getting some port work done, after this is completed, what other modifications are necessary to maintain the highest reliability? Compared to stock how reliable will it be? can i still run her hard everyday? THANX
  22. BANSH-alena-jol-EE
    how much hp does the 12 port port job for xc produce? and do u have a number to reach Jim at passion racing? i am interested in porting myself
  23. BANSH-alena-jol-EE
    hello, i have been running my shee on 87 octane for a while, just switched to 91 octane gas, is this ok for a stock engine?
  24. BANSH-alena-jol-EE
    what is so bad about this TORS? and what benifit is it gone ?
  25. BANSH-alena-jol-EE
    i have fmf sst's their sick for top end, y do most ppl bash them? seriously ahah is there a reason cause ill switch ahha, who did you porting and what did u get done?

BHQ Quick Links

×
×
  • Create New...