Holyman

Well I'm looking for one if anyone has one they're tired of.

I'd be happy to have a look at it and see what I can do. Send it out and include your phone number so I can call you if I have any questions. email me if you need the address... [email protected]

WELCOME to BHQ. It sounds like he may be right when he says there's no compression. Might be good to tell us what the compression actually is and any modifications that have been done to the quad. Alot of people say that Banshees have reliability issues but the best way to keep them going is to do a regular compression check. So if you don't have a compression tester, invest in a good one while you are waiting for the manual {really first and best investment}. To test the compression, you will need to remove the spark plugs, screw in the tester, hold the throttle wide open and kick until the needle doesn't go any higher. repeat with the second cyl. If it is 100 or less or there is more than a 10% difference between the 2, you will need to do a top end job. Some will say just to do the rings to improve compression but I have found that to be a waste of time and money since the cylinder is worn and the new rings are expected to bridge the gap. Anyways... let us know that stuff above and we'll do everything we can to help you out.

They come free with new A arms. You can't replace just the ball joint on the A arm

Been lookin' at this thing too long... http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMESSE%3AIT I will gladly end auction for BHQ members. I'm looking for an AMP link, New round axle carrier with tapered bearings, aftermarket rear shock, + size A arms, PRM Desert bumper, or a good running blaster engine {2002 Blaster also has got to go if I don't get an engine for it} or a Polaris 250 or 400 2 stroke 2000 or newer. I'm obviously willing to trade up or down so let me know what you have. DO NOT PM ME... email me at [email protected]

Been lookin' at this thing too long... http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMESSE%3AIT I will gladly end auction for BHQ members. I'm looking for an AMP link, New round axle carrier with tapered bearings, aftermarket rear shock, + size A arms, PRM Desert bumper, or a good running blaster engine {2002 Blaster also has got to go if I don't get an engine for it} or a Polaris 250 or 400 2 stroke 2000 or newer. I'm obviously willing to trade up or down so let me know what you have. DO NOT PM ME... email me at [email protected]

Yeah I've been practicing on that one. That has got to be the most worn kicker I've ever seen.

Send me an email and let's talk... [email protected]

http://www.hoslap.net/

This is awesome... Deacon Dr. holyman Joker Snake Eyes M. Luthor Pimp Daddy moral dk Slither

Next time you talk to Quinn ask him if he gave me any props in this article on the bearings he got from me. AND can someone send me a June copy? I can't find one now and I never buy the magazines unless I know there's something worth reading... so basically never.

First of all I'd like to Thank those of you who sent your kickers to me to rebuild. I have gotten a lot of good info on how to do it right and hopefully I can offer my services on eBay to help pay for doing this for very low cost for HQ members. I've had several generous people pay a little extra to go toward the next guys kicker which shows the kind of place BHQ really is. We may not see eye to eye on everything but we all support the sport of ATVing and the little squabbles we may have about other stuff is just seasoning on the steak That being said I'd like anyone who has had me re-do a kicker sign in here and let me know how long you have used it and how it has worked for you. I have probably done about a dozen but the problem is I rarely get the BHQ name to go with the name on the package so I really don't know who is who. I also want to let Denny Schwartz and D Sumpter know that your kickers are in the mail. The last few kickers I have sent out have a short piece of black anodized ball chain attached and an extra Stainless allen screw. I'd like to know if you guys are using it or just cutting it off. This chain can be attached to the engine case by removing and replacing the screw just to the left of the dipstick. In the event that the lower bolt comes out of the kicker, the chain should keep you from losing the kicker all together. And since used kickers are going for around $50 I figure something to keep from losing the kicker is worth it. The ends are stainless and the chain is aluminum and anodized so it should look good for quite a while. Anyways... looking forward to hearing from you guys. Thanks

You know with all the transactions I've had on ebay {over 800} you would have thought that I would have cought that. I sent the guy an email too and he never replied. Tell tale sign of a scammer. Needs to buried alive under a mountain of broken flat screen TV's

Just so you guys don't think I'm taking anyones political side http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...MESSE%3AIT&rd=1

I guess it's a computer monitor... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...MEBWA%3AIT&rd=1 I think I'm gonna go back to the inverter plan like you're doin' Rod.

GBP Great Britain Pounds I think. The auction says it's in Euro's and the coversion was $177+ thou.

Make sure you add in for the best pipe, what premix ratio to use, best tires and best air filter setup

Finally Banshees are going for what they're worth http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...2478254096&rd=1

I was going to use the inverter idea and just drop a 19" TV with a VCR between the two front seats of the van and then do exactly what was said, PS2 and be ready to go. The thing is I saw a built in DVD/CD player and thought if I could rig up a monitor {some says he's selling 19" LCD monitors for $150 waiting to hear back on the real scoop} to hang from the ceiling and I would get the CD player built in {wanted that anyway only cassette now}. Then I could do DVD's and have the monitor. Couldn't do PS2 but at least I wouldn't have to setup and disconnect the whole "house" TV arrangement. I think I'm just going to buy a CD player and then do the inverter thing.

What year? Send me an email on this too [email protected]

Send me a pic... [email protected]

I'm planning a road trip and want to install a DVD player in the van and I want to hang a flat screen from the ceiling. Can I do that? Just for the DVD player not as a TV tuner.

I hear yuh bro, I hear yuh

The key is in the ceiling light in the same room as the second hidden floor passage. I think it's also the same room with the desk lamp that shines on the wall that gives you the final password in the last room to shut off the final force field. The green wall... You start from the left and click so that the first vertical row is all green. Don't worry about the second row at this point. Just make sure the first row is green. Then skip to the third row and click so that the second row is all green. Then go row by row until the whole wall is green with the exception of the last vertical row to the right. It will be missing a few green ones but the door will open. I don't remember where to get the wire cutters.

I hat eto say it but it sounds like that old song... You can't trust your soul to no backwoods southern lawyer\And the judge in the town's got blood stains on his hands. I'd say fire your lawyer. That's messed up. If you got a bill of sale it should prove that you had nothing to do with the thefts. The owners should have had insurance on the stolen machines which should cover the cost of the quad all togather regardless of what happened to it once it was stolen.