majorcr3

u might get a little more help if you posted this in the right forum

who did your porting?

Im looking at the wcr overrides for my 4 mill. What does undercut gears mean? I want a 1-5 duneable tranny with stock neutral position. Any insight would be appreciated.

Looking for a nice set of Paul Turner High Revs. Chrome must be in good condition and no dents. I dont care if they come with silencers or not I just want the headers in Great condition. Have cash ready to buy. Thanks, Nick

You need some domes that are cut for blaster pistons. Those 22cc domes plus that flat top piston is probably your main reason. Do you have any port work done cause that will affect compression too.

I have a bottom end out of a 2006 banshee. I have 2 other motors that are projects so i dont want to put any money into this one. Asking $350 shipped. The motor comes with: Both cases in great shape - just needs cleaned stock crank - needs rebuilt drive gear and water pump gear on the end of the crank tranny is good shift drum and rocker arms in good shape clutch outer case cover in good shape water pump clutch basket clutch pressure plate kicker spindal and gears idler gear clutch plates mulitiple nuts and bolts ect DOES NOT COME WITH: stator clutch inner hub inner shift shaft nuts for both ends of the crank keyway for the clutch side of crank needs some random nuts and bolts I priced it out that i would take about $150 to make it a solid complete bottom end. Most people on here have most of the parts just lying around anyway. Just looking for some money to put into my other project. My ebay mane is majorcr3 if you want to look at some feedback.

I need some pipes but really just need cash

I have a set of good condition 36mm pwk with throttle cable attached and k&n filters asking $300 shipped. My ebay name is majorcr3 if you want to check out my feedback. Sorry my photos wont load up here even after resizing. send me your email and ill send them to you http://img696.imageshack.us/g/photo0032.jpg/

Any year a-arm frame with title. I dont care if it has bad paint on it or what ever, im going to powdercoat it anyway. I also need a rear shock that is valved and sprung for a +6 swing arm. I live in corvallis oregon so something close to here would be prefered but I will work with whatever if it comes down to it. Thanks, Nick

well my 8 month old black lab ate my camera for lunch about a week ago and i tried to use the camera on my phone but the look like hell. Im hoping to find someone in oregon to deal with

I have a banshee with a 2005 4 mill stroker motor in it. Has polished lockout clutch assembly, polished stator cover, prodesign head, stock carbs, +6 over swing arm, 9 paddle extreme ultralights, front mohawks, line-x plastic and frame. It looks alot better then it sounds. Also that will go with it is 2 sets of cylinders with pistons, one set is ported for a 4 mill, one has a clean up port. A axle assembly with sprocket and brake hub and both wheel hubs. Also I have a 68mm used monoblock topend kit that ran great when it was taken off the motor. And a pair or 36mm pwk's with k and n filters. One problem is the bike doesnt not have exhaust on it. I had a buddies on it and he decided he wanted to sell them and i never bought a set to replace them. Asking $3800 firm or trade for a 600cc - 1000cc honda or yamaha crotch rocket in ok condition. I live near corvallis oregon. I dont have a camera so please dont hound me about pictures.

I have a banshee with a 2005 4 mill stroker motor in it. Has polished lockout clutch assembly, polished stator cover, prodesign head, stock carbs, +6 over swing arm, 9 paddle extreme ultralights, front mohawks, line-x plastic and frame. It looks alot better then it sounds. Also that will go with it is 2 sets of cylinders with pistons, one set is ported for a 4 mill, one has a clean up port. A axle assembly with sprocket and brake hub and both wheel hubs. Also I have a 68mm used monoblock topend kit that ran great when it was taken off the motor. And a pair or 36mm pwk's with k and n filters. One problem is the bike doesnt not have exhaust on it. I had a buddies on it and he decided he wanted to sell them and i never bought a set to replace them. I figure there is about 3800-4000 worth of parts here and I would like to trade for a honda or yamaha 600cc-1000cc crotch rocket that is in ok condition. I live near corvallis oregon. I dont have a camera so please dont hound me about pictures.

I have a very nice set of cpi out of frame pipes welded silencers 300 obo http://s86.photobucket.com/albums/k87/majorcr3/oof%20cpi/ I have a very nice set of t-6's with silencers 400 obo http://s86.photobucket.com/albums/k87/majorcr3/t6s/ And also an ok set of t-3's that i dont have pics of. Make offer on these Always open to trades. Looking for some t-5's, cpi in frame, pt high rev, over ride tranny ect.

I have a bottom end already torn down ready to ship parts, just let me know what u need. Flywheel and clutch basket already gone. Complete 68mm cheetah topend off of a different motor ready to bolt up and go 600 shipped. Have a polished clutch cover, stock stator cover, billet kicker thats messed up where it went down and would hit the stop on the footpeg. Also have complete wiring harness, cdi, coil, and regulator, no key switch. Just pm me for parts u need and ill give prices. I dont post prices because people who buy multiple things ill cut deals with and usually ship for noting. Trades always welcome. Nick

do you have a title for it?

crank, tranny, shift drum, shift forks, clutch inner hub, pressure plate, stock water pump assembly, stator, all in great shape top case has a piece missing where chain came off and bottom case is also in good condition

What?

no dents ding or repairs. they are hanging different because my buddy lost a bolt out of one of the peg mounts and had to rig it up to get it back to the pickup this last weekend. we loaded it on the trailer and left after that

yeah they are on a small bore bike. im not sure what mounts u are talking about. they are hanging different because my buddy lost a bolt out of one of his mounts and had to rig it up to get it back to the pickup this weekend.

PICS of the t-6's http://s86.photobucket.com/albums/k87/majorcr3/t6s/

PICS of the t-6's http://s86.photobucket.com/albums/k87/majorcr3/t6s/

PICS http://s86.photobucket.com/albums/k87/majorcr3/oof%20cpi/

PICS asking 300 http://s86.photobucket.com/albums/k87/majorcr3/oof%20cpi/