majorcr3

i have a like new set of out of frame cpi's. looking for t-5's, in frame cpi's, paul turner hi revs, 1-5 dunable tranny, cub cylinders, and open to lots more just send me a pm

I have a like new set of out of frame CPI's with welded on silencers. Asking 300

my ebay name is also majorcr3 if you want to look up some feedback

my ebay name is also majorcr3 if you want to look up some feedback

all bottom end parts up for trade minus the flywheel and clutch basket. T-6's and silencers also available. Looking for a 1-5 dunable overide and a set of t-5's or in frame cpi's pm me for details Nick

all bottom end parts for sale minus the fly wheel and clutch basket. a set of good t-6's and silencers also. pm me for prices thanks, nick

http://s86.photobucket.com/albums/k87/majorcr3/ sorry it took so long i tried to get the best i could. The cylinders do have some light rust that u cant see in the pics and could use a fresh hone job to be safe. No dings or anything that catches my finger nail that i could find. Thanks, Nick

I just got a monoblock top end from a good hard running engine. 68mm bore on a stock stroke. I pulled it off a customers bike who wanted to go back to a stock cylinder setup. I dont know what size the domes are cause i didnt want to take them out of the head to look. looks like a clean up type of port. The compression was around 185 in both jugs. No pitting in the domes, pistons and rings still have a ton left on them, reeds are good too. The only problem with them is they are spray painted blue and will need to be cleaned up(easy fix). The guy also had a leaky head gasket so there was a little rusting that I already cleaned up. Package come with the head, domes, cylinders, pistons/rings, reeds/reed cage, intake manifold. Buyer will need new head and base gaskets. Will trade for a 4 mill cheetah cub 68mm top end. or trade plus cash on other parts Asking 700 O.B.O my ebay name is majorcr3 if you want to look up some feedback because im new to the HQ

I just got a monoblock top end from a good hard running engine. 68mm bore on a stock stroke. I pulled it off a customers bike who wanted to go back to a stock cylinder setup. I dont know what size the domes are cause i didnt want to take them out of the head to look. looks like a clean up type of port. The compression was around 185 in both jugs. No pitting in the domes, pistons and rings still have a ton left on them, reeds are good too. The only problem with them is they are spray painted blue and will need to be cleaned up(easy fix). The guy also had a leaky head gasket so there was a little rusting that I already cleaned up. Package come with the head, domes, cylinders, pistons/rings, reeds/reed cage, intake manifold. Buyer will need new head and base gaskets. Will trade for a 4 mill cheetah cub 68mm top end. or other trades plus cash welcome Asking 700 O.B.O my ebay name is majorcr3 if you want to look up some feedback because im new to the HQ

Try switching your bowls on the carbs. The left one is different from the right.

Take a look at your reed block. One might have loosened up but didnt completely come off.

How much for the bottom case, perfect radiator, and the old style tail light? Please give prices for each item. Thanks