BUILDER

Well we just got back from Glamis. That was a hell of a trip! That is a long drive straight through. We had a hell of a great time. Jayzx750 it was great meeting you and riding with you! You made an awsome tour guide and we had a lot of fun. LOL next time we will remember to bring more beer buddy. Hope you can make it to Oregon some time soon and we will make sure to show you just as good of a time as you showed us! I must say Glamis is a hell of a lot different that the Oregon dunes and i have never spent so much time riding my banshee in 5th and 6th gear. I had a great time running the drags and jayzx750 and i had fun kicking everyones ass! You bike runs hard man! Last thing all the people we met were very frendly and one guy even took us for a ride in his 450 horse ls1 rail which was crazy. Hope we get to do it again soon! I will get pics posted soon.

I got a pair of tie rods with ends on them if you are still looking. Shoot me a pm if you are.

I have a couple of stator covers if you need one lowbucks. 20.00 shipped. Let me know.

Very good point tidos i was not thinking about that.

You can tape the screw up and as long as you can tighten the jam nut and the screw does not come out when you are tightening the nut you will be fine. If you are in need of a factory carb just shoot me a pm i have a few carb bodies laying around and i will send you one if you just pay for the ride my friend. I may even have one that is drilled already.

Ok guys i know short notice but we still have room for 2 more guys to go to Glamis with us. We are leaving Tuesday night and will be hooking up with some other guys from the HQ when we get there. Going to be a hell of a good time!

I should have a very nice used set here in about 2 weeks if you are not in a big hurry.

PM sent also

Like the donkey man said lol. Clean your slide good with a rag and some brake clean and also clean the inside of the carbs with a rag and brake clean.

I agree that pilot is to big for that setup. If you want you could probably get away with a 27.5 but i would get rid of that thirty.

lol tried a popit on my shee a few years ago. I never made it more than a 100 yards out on the sand before it poped off tried it three times and got pissed and threw it away. We run steel cb whips on ours. Next to impossible to break and last forever.

We have drilled most all of our wheels. We have acouple of guys that ride hondas in our group we we have drilled our wheels to fit both.

Ya know i was talking to someone on this site here just a while back and they said hey you seem like a nice guy and to tell you the truth most of the guys i have met from were you live are kind of arrogant assholes. I told him i was sorry to hear that and i thought most people around here were really nice people. Well with a reply like that i can see were people would get that idea! Ya know why couldnt you just have ask if he had tried to adjust it? There is no reason to be a jerk! Congrats on being a new banshee owner and enjoy buddy. You will find that people here are very helpful for the most part and you can find most any answer you will need.

Pipes and stator cover shipped today. Thanks guys. If anyone needs anything else off this thing let me know.

All PM"S returned. Pipes sold waiting payment Clutch cover sold waiting payment Cases are avaliable they are nice cases with no breakes in great shape 200.00 shipped. Tranny is in great shape 200 shipped seat still avaliable 175.00 with brand new cascade cover A-Arms all good and tight 200.00 plus the ride.

All messages returned. O and those who ask i will email you here in just a few i am going to part the motor out now i am not selling it complete. So if you want any parts out of the motor let me know what you are looking for and i will get you a price.

Sorry guys was in a hurry when i posted that thing. Pipes with silancers 350.00 Motor complete 900 Frame with title 250 Complete from A-Arms 200 Chrome spindles 75.00 chrome needs a good cleaning New Cascade seat 175 All prices plus the ride. Any other prices you want just ask thanks

I am parting out a 1993 Banshee. The motor has just been gone through. It has a stock stroke hotrods crank that has been trued and welded wiesco pro lite pistons the head has been milled also. No port work and it is on the stock bore. It has shearer in-frame drag pipes on it and the frame has been powder coated purple and i do have a title to it. The seat cover is new and from cascade inovations. If someone wants anything off this bike let me know before it goes on ebay in pieces.

Spray a little paint remover on them and they will rub right off glue and all. LOL Just be quick dont let the paint remover sit there.

http://portland.craigslist.org/clk/rvs/1054684053.html I would like to know why this one looks so differant than any other? Is it because it has no rear plastic? I swear people think every one must be tottaly retared when they write this shit.

Right on man we will hook up for sure while we are there. I weill send you a pm with my cell and you can give me a call when you get there. Hope we can do a little ridding together.

Does it start once it is warm or is it hard to start all the time?

I put a 4 mill in my bike last year after ridding it for 4 years with a stock stoke. I would never think of going back. It makes way more power and it is a blast to ride. It has more power all the way from top to bottom. Just a word of warning better start working your arms out if you but a 4 mill in lol my arms hurt after a weekend of ridding now. As far as being worth it. In my opion it was money well spent! If you are going toport it anyhow and you dont have a weleded crank spend the extra few bucks and get the crank.

Ok thanks again lowbucks i really apprecaite the advice.