Jump to content

Darthwall

Members
  • Posts

    822
  • Joined

  • Last visited

Everything posted by Darthwall

  1. this looks like another case of old un wanted factory castings going to other parts of the world its like the 300 dollar mini motorcycles being sold with honda atc 110 castings
  2. the 450r suspention is different than the 450. 450r has longer shocks making up for the added length in A arms its the same as using +3 longtravel arms with 18" shocks on a banshee. the problem we have is the yfz has narrow lower rails not sure but close to 1" on each side and kicks the bottom of the tire out on a banshee and binds the ball joints up
  3. first off the stiff steering is why I started this topic. If you want a custom seat pm VegasJeff he does nice work and can probably shave the seat down it's done alot on drag bikes but might not be very comfortable?
  4. the R6 shock is a good mod for a drag bike I used one on a +8 swinger and +2 out front with over 100hp couldn't get the ftont off the ground it hooked up great but for just riding around not that great
  5. pm sent
  6. lots of bites no keepers lol
  7. If you start mis matching parts its not a good idea at all you might get lucky and you might not! but that is part of the R&D process.
  8. nice glad it worked out for you thanks for the biz
  9. I sent some pics over im not making these this is a pjoject that didn't get finished colors above are extra I have and can shoot for cost
  10. I agree with you the cost is close if I do the upper arm by all meens I am not trying to make money just fix a prob if somome knowes the moog # for these it would be great if not what is a good heim jionte to use
  11. this works well as long as its not your first time doing it with a lil heat. I have melted crankes. doing this but at the same time you can make it better dont gett in a hurry and we dont have the cuncks stealing my identity lol
  12. up again nice stuff here here pm for any need liquidating all parts cheep
  13. well first off welcome to bhq im not posoitive but at 1000ft elv its not much different than im at start off high in jetting say a 160 or 158 main I this is a nice start point the last thing is to lean out im at 900ft and this iisnt much to to the ocean
  14. Ive noticed in a tight pinch a good hardware store has soom good close parts like tacoma screw
  15. ttt check my feedback no ps here
  16. kevins work is good stuff you wont be sorry
  17. the mono block needs 1 new sleeve and the matching cases need a small spot welded up the cylinders are drag ported for 4mil and are at 70mm bore they are a very hard runner I really dont know what to ask for them right now the 2into1 stuff I have one complete setup ready to bolt on and go the one with everything besides filter and cable
  18. what are these set up for a 350? are they a pump carb or gravity?
  19. over the years I have accumulated tons of banshee items and I think it might be coming to an end soon. its time to finish my other project so I am looking for a nice set of 64cc heads and maybe 700dp holley. I have 2, 2into1 trinity setups, +8 swingarm, tranny, vitoes mono block and matching cases that needs work, A arrms, shocks axle about everything except frame pm me
  20. look on chaperell or other sites CEL needles are what im running on 34 pj's on 3rd clip 155 main 50 pilot im at 1000ft so not far off start rich and work down good lck
  21. as the title says made of 3/4 moly tube ppg black paint for link style pm for pics
  22. sb for more bottom bb for top I haven't run bb pipes but a 446 with sb drag port was like a dune port nice all around power
  23. when you put it together did you make sure and clean the cases really good? get rid of any oil on them?
×
×
  • Create New...