Powerstroke

Not sure how you will get it to idle with out em. Maybe take all the slack out of the cable? Not how I would do it.

Thanks for the offer PM sent. No idea what happened I was on it hard and it started slipping bad. I'll try another OEM before I spend the big dollars.

Well I went out this morning to rock my new T5s and Knarlys and BAM look what happened. Is this common or just a fluke? So it looks like I have a couple options new/used OEM or Aftermarket. What are your experiences and opinions?

Go get a piece of clear tubing that fits the bleeder tight. Run it from 1 open bleeder screw to the resevoir. Pump the brakes until it runs clear with out bubbles. Repeat on the other side. Has never failed for me.

Keep your eyes open I picked this one up pretty cheap. OBTW it says you can run up to a 15 tooth sprocket.

Got it that makes more since.

Anyone have close up pics of how they made wal-mart lights work with there stock mounts?

I really like my Toomey 2into1 filter. A little scared about water/mud it is really out in the open. Time will tell how it works out.

12 years fixing Fords at 2 different dealers.

Don't feel bad I drilled the wrong side of my left carb. JB weld bailed my ass out. Look at it on the bright side if you can't get the tap out you have a great excuse to upgrade to bigger carbs!

Where not worthy! Awesome job wish I could polish like that.

I was torn between no and pics of bbcmudtrucks wife. Went with hell no.

Thanks man, where do you buy Busch polish is it available at any national retailers?

Hi guys I've been busy polishing my stock wheels. They were originally gold then someone spray painted them black. The paint was chipping badly so I sandblasted them clean. Sanded and buffed got a pretty decent shine 100% better than when I started. Let me know what you think.(besides I have to much time on my hands) sandblasted and sanded polished almost there Any suggestions on bringing them up to a higher finish would be appreciated.

I would go with the T5's but buy used and spend the rest on a shaved head/ cool head and a timing plate just my .02 that should get you where you want to be.

Mine is leaking also curious what you find out.

Only took me 1 day to notice.

I/R airtools all the way! Cheap enough for home tough enough to use everyday. You may consider a Dewalt battery powered impact. My 3/8 Dewalt will do everything on my shee.

I got a set of used T5's and was wanting to order the jet kit. How important are the needles? Should I just order some jets somewhere else and get to tuning. Thanks for the help guys.

Does anyone know about powerbrokerz taking over toomey.com? Are they safe to order from they don't accept paypal?