sangheraent

I am looking for a stator cover thats in bad shape something that can still be bolted on but that has seen better days but it has to be metal not the stock plastic. probably something aftermarket that hasnt been taken care of.

if I had known I didnt need vforce 3s I wouldnt have wasted so much money on them that was like the most expensive thing besides the pipes that I did to my bike. but I do plan to do some shit to this bike in the future im gonna do some porting when I get back from vacation and then go into a cool head or a milled head. I dont really want to go into a stroker crank cuz im cheap. I want to get my shee around 65hp or so might have to swap out the toomeys.

http://cgi.ebay.com/ebaymotors/Dynatek-Ign...emZ380076592691 it says it adds 3 horsepower is this worth it? im lookin to add some power to my bike im neck and neck with the 450s and want to win my engine mods: toomey t5s vforce 3 K&n intake +4 timing I was thinking about porting in the winter too.

thats what I thought i have the wierdest problems with my shee. I can touch the cylinder inside the carb with a screw driver. can I just put tape on it for now until I get a new carb? will it be enough to hold.

I need one stock carb. right one only. my bikes glass thingy fell out so I need yours help me out!

my banshee was running on one cylinder then I stoped to check out whats going on and realised my right cylinder only runs up to about 1/4 throttle. thought it needed cleaning but when I was playing with throttle it reacted the same way over and over again. so when I went to open the bowls I realised my glass hole on my right cylinder was gone. do I need to buy a whole new carb or can I just get a little glass thing?? could this even be the problem? it was running primo before that

I bought a durablue eliminator axle 2+2 off of a member here and im installing it as we speak and with the hubs on my stock axle lined up with this one its only an inch and a half wider max. the spacers are maxed out so its as wide as it goes and it can be norrower I havent put it in and it will be a couple days before I have the time again but are they suppose to be like that or did I get ripped off?

my banshee doesnt have a tail light stock but I wanted to put one in. Can I just wire it to my front lights and have it turn on when they do?

my banshee and my yfz both have the same problem banshee pulls hard right yfz pulls hard left when I brake the harder I brake the harder it pulls then the one tire just stops and the others spinning totally fine. I have no idea why it would do this? air pressure brake pads are even on both sides.

are you selling the bolts from the front fender and the grill? haha

lucky sob

hey everyone my banshee is white and I have painted the tank plastics black I was wondering if anyone had a white banshee with a nice aftermarket graphics kit pictures would be great?? Also doees anyone know where to get a nice graphics kit for a white banshee.

thanks for the link savage after following the directions I feel like a new man

i messed up my stator not tighting the bolts after installing my adjustable timing plate and bought a new stator off of here assuming my banshee was a 95 like I was told when I bought it. When installing my banshee i realised its older after checking the vin i learned its a 93. so instead of buying a new stator I just choped off the plug of my ruined stator and wired it on to my 95+ stator after doing all that I connected everything very well and still no spark. first of all is this even acceptable can I even do this? assuming I did this right what should the pickup coil gap be at? has anyone done this and succeeded?

im not a mechanic but my guy told me not to put ethanol gas in my yamaha 250f i have to go to chevron for my gas or shell. Its not good for the piston or something hope that helps.

Abbotsford BC. right on the border where the shipping costs double for the extra 10 feet its long distance to call the guy that lives infront of me. i like these forums, better info seems like our local (wont mention it)forum has the same 5 guys messaging on every forum no matter what sombody has a btw gary hows your wife or hows the quad.

thats some nice weather. how far is revelstoke from say chilliwack?

wanted front +2 brake lines preferrably ss.

that has to be a joke?? if its not you are one nice guy.

alright I found a pair of banshee rims so Im just looking for the tires now.

I need Itp sand stars fronts preferrably mounted on rims. or any other front sand tires.

I put 330s in it yesterday and it runs perfectly. the plugs are a little on the wet side but I like it a little rich. I didnt touch the needles or the pilot and it starts idles and all the way through pulls without backfire,bog or anything. thanks guys!!

I am looking to trade my nice white plastic minor (scratchs) I will add picture later tonight for somones black plastic I will be willing to pay a little extra aswell. let me know.

anybody?

no i forgot to mention im running no lid.