Mjv420

Your right about the quality of these routers, they are junk. There are some nice features unlocked also, I especially liked the snr graph which can help you tune in wireless signals. But for the fact that he is not very experienced with setting up routers period I didn't think it would be logical for him to try to reflash the firmware as they are many different versions, etc. I have had many of these linksys routers with the dd-wrt firmware over the years. I tried dlink's gaming router and have been more than happy with it.

Hey quikshee thanks for the quick shipping on the parking brake blockoff!

I have a set of brand new never ran Keihin 35mm PWK carbs and a brand new Boss billet intake w/built in crossover w/hardware. Prefer not to split the intakes from the carbs $400 shipped Also have a set of stock cylinders, stock port on a 64.50mm bore. They do have some surface rust on the bore and came off a bike which threw a lower crank rod bearing. From what I can see there is no deep scarring. $180 shipped If you would like any other information that is not given or more detailed pictures of something just ask. Im possibly open to trades depending on what you have, looking for a Trinity IV intake w/carb/cable atm. Thanks, Mike

God this kid is a fucking looser.

The dd-wrt fw is very nice if you need any of the features it provides, in his case with limited knowledge I dont think dd-wrt should even be mentioned as a solution. Xbox live service is very easy to hookup, either enable UpNp or forward the Xbox live ports. The problem he is having as i've had this same problem also. Is that his ps3 will not connect to the wireless signal the router is transmiting. I dont own a ps3 so I really cannot be that great of help, only suggestion I can give you is to find some online PS3 documentation and read it. Because the problem is more than likely with the ps3 and not the router. If you can get ahold of a long ethernet cable and make it look conceled and nice at the same time I would just hardwire it also, it will save you alot of time and possible headache.

Whats broke currently?

My mid-pipes and silencers are getting really hot after a good run up the road and back. If I can remeber correctly on my old setup mid pipes and silencers were always warm after long trips, not on fire like it is now. I did put a new o-ring on the spout running from the impeller out of the case and also installed a billet impeller, radiator & cap is off my old quad which I never had any problems with. I can touch the cylinders with my hand and they are not as hot as the exhaust is getting, it's got me worried and I have not rode it since the last run. Possible of a leaky o-ring in the head? No anti-freeze is pretruding from the head...

That sucks blowit, was very poor decision on your part to send it out though before recieving payment. People cannot afford to try to help people out anymore it seems like..

Well lets see what we got here. 1. Poor english. 2. Joined yesterday. 3. Shows a stock photo of something he wants to trade for. I sure wouldn't take this serious at first glance.

The tors units sit on top of the carb caps.

You need to fix your for sale sign.

Bump for alot of good parts, would you consider parting the crank from the bottom end?

Lookin for a cheap stock set with good splines/lug threads. Might also be interested in a lonestar set. Let me know whatcha got.

pictures of the pipe clamps, im needing a set.

He did this so other stupid people could find and see his ad.

Damn good prices here on a set of cylinders and carbs.

lol.

Sounds like a youth atv or bike...

PM sent.

Pictures and details on the +2+1 arms and shocks.

Bump

I'll offer $100 shipped.

Bump

Selling off a couple things, here they are. Toomey T5 pipes - $210 shipped (Front hangers are not included) Polished stainless rad grill - $35 shipped (Blue Rad shroud not included) Blue uncut stock rear fender - $90 shipped 3 spots on one header where the chrome has flaked. Hairline crack on one header mount tab, should be welded up before installing. Tab welds, spring tab welds all look good. A couple small dings nothing major, has some pitting on one header down near where the header meets the midpipe. Normal wear from riding. Stainless grill is in nice shape, it is dusty in the picture I took and will clean up nicely. Stock rear fender is in overall good shape, one bottom mounting hole is slightly bored but should not affect mounting. Some stress marks. I am also open to reasonable offers, possibly trades. If you have any questions or want more detailed pictures just shout.

Nerf bars sold?