Bancheez

I am looking for a banshee rear shock to rebuild. I have an Elka ZPS kit, but no shock to install it on. It has to have a good chrome shaft, and it has to have the gold anodized reservior (in good cond.). I don't need the spring, collars, or preload adjustor. the shock can be blown, it doesn't matter. Pm me with what you've got and what you want for it. pics are a plus. thanx alot in advance.

Yep, $350 shipped.

Nope, It's just a spring and valving kit for your weight, set-up and ride style. You still have to buy a seal head ($30), fluid ($5), and have someone rebuild your shock ($60). I have been doing my own lately, just gotta pay another guy to charge 'em. so for me...GREAT DEAL!! Think about it... A spring $100, Goldvalve $125. $80 sounds way better than $225!

I just ordered a Zero Preload kit for the stock banshee shock from them. $80 for spring and valving to rider weight!! Can't beat that. Hope it works well.

I tried like hell to get pictures uploaded in here... with no luck. Just click the Ebay link for pics.

I have for sale a very nice and UNMOLESTED, Graydon Proline 2 into 1 intake. Comes with a VERY nice 35 PWK Airstriker carb w/all new vent lines, Good used throttle cable, a new silicone intake boot & stainless clamps, 1 NICE K&N air filter w/1 outerwear, and 4 new Intake gaskets. All pieces are in EXCELLENT condition! No disappointments here! $350 shipped. This is also on Ebay till the end of the week. The last one I had went for $500 on Ebay!! HQers get it now for less.

Jamestown NY...Just south of Buffalo

yeah, not too worried about the ebay fees, since i got $150 more out of it on Ebay, than I was asking for it here... $500 shipped!!!

ENDS TONIGHT!! Clicky Clicky

BUMP! Ends tomorrow...

NOW ON EBAY - Graydon Intake

whats the question?...

No, if you are running stock port cylinders, you HAVE to run a spacer plate. If you want to run stroker domes instead, you would have to have the cylinders ported to affectively "raise" the ports for the 4mm stroke, and ditch the plate. one or the other... except, I have run stock port cylinders w/a 4 mil crank, (no "plate"), and stroker domes in the past. makes a excellent woods bike, TONS of low-end, but NO top-end...and if you try to run them on top, set-up like this, the motor won't last too long.

Included is: Graydon Proline 2 into 1 intake (unmolested! & freshly polished), 1yr old 35pwk w/boyesen float bowl, Terrycable braided stainless throttle cable, 2 NICE oversized K&N filters w/1 outerwear, 2 UNI foam filters (need cleaned), New silicone intake boot, 4 new intake gaskets, and a box of every main, pilot, and needle you could need for this set-up. All items in good condition, ready to bolt on and run! $350 shipped. Sorry it took so long to get the pics up, but here they are: Pic Pic 1 Pic 2 Pic 3 Pic 4

LOL, yeah, sorry... How much for the toomey's?

Im a Polaris & John Deere technician at a huge dealership. Also build motors on the side for extra cash$$$

how much for the pro circuits, nyuk?

I have for sale a very nice and UNMOLESTED graydon Proline 2 into 1 intake. Comes with a 35 PWK carb that was purchased NEW at the beginning of last riding season, a new silicone carb boot, Terrycable Braided Stainless throttle cable (also new last season), 2 or 3 NICE oversized clamp-on K&N filters, and a box of every main, pilot, and needle jet you could ever need for this set-up. I would like $350 shipped, but I am open to offers. I will get pics. up tonight. thanx.

Yeah, Im still looking for a set of them. what do you think you want for them? pm me . thanx.

bump

I have a nice Cascade 2into1 intake with boot and all munting hardware (no carb) i would let go for $125 shipped. I will also include a set of cascade stuffers for v-force 3 reeds if you want the intake. pm me if interested.

Just what the title says, I am looking for a set of the large bolt pattern rear banshee hubs. I believe they were on 87-89 j-arm banshees, and i think they put them on the 95's too. thanx alot.

I have a set of stock port 65mm bore (need bored again) cylinders if interested. $175 shipped

I have a set of 65mm bore stock port cylinders. They will probably need bored, but they are in nice condition. $175 shipped

the axle measures 31 1/4" at the hub flanges (flat spot behind the splines that the hub seats against). If this is what your looking for, let me know.