strokerace

there nothing wrong with that shee some peole just like being slower than the real 2 stroke screamer

interested in the tranny sent you a p.m

i have a shee im finishin up has a plus 4 swinger plus 2 a-arms with elka shocks ,lonestar axle black full bore plastic trinity pipes 485 4mill cheetah motor(not cub) v-force 3 35 pwk carbs billet side covers all is new nothing has been run let me know if interested other wise im selling the motor

i have some trinity pipes new shape never ran going to build woods bike but now im building another drag shee

i ended up getting an ssr rigid drag frame 20 in front and 9 in rear going to put 18 mill in there and 4 mill in frame i have already

what about ssr rigid frame 20 in front and 9 in rear what would be a good price for one new never used has no radiator mounts or plastic mount which i could finish myself but dont know what to offer him

i have a 485 cheetah (not cub) 4 mil with 73 mm bore with new cases new crank new cylinders new vforce3 and 35 pwk carbs set for gas new never even fired it yet would be willing to trade but not going to give any boot yours has been run if not interested im selling the top end off the 4 mill and going to build a 4mil with d.m. cylinders this winter if interested let me know

gleasons a 7 hr haul from house in va crossville is only 3

running 1/8 mile friday night who might be able to make it lets run some passes and when were done throw back some brews and make a night of it im going to run all night or till i have to rebore it which ever come first

i have 2 sets of stock carb both in good shape with tors removed let me know if interested

i have alba arms with elkas only have two rides on them i also have one set of albas arms never mounted brand new

i have a lower case half in good shape the upper is bad if interested in the lower let me know

if you decide to part out im interested in the frame i know you said you wouldnt part it out but hey im just putting that out there

i run bolted tires and they hook hard iwas running nonbolted tires and got smoked off the line running cut mud light sp now with bolts in every tread (5) bolts per row of tread

spray some paint inside of the grip slide on wait a few minutes to dry will never come off

if your going to run 1/4 i would put 17 tooth on front any less gear and you will be toped out before the 1/8 th

just got pics done this morning of the grizz will send them to you in a p.m.

how far your running and gearing need to put a tall gear on there so you are not wound like a banjo string 300 ft down the track and i would fatten up the top end a little more than you normally run

I use purple ice in my shees except for my alky shee works good inothers kids 85 cr and ktm 65 sx ,banshee works as good as engine ice if not better

i built one this weekened took about three hours to build from cutting the first piece to painting

i built one this weekened took about three hours to build from cutting the first piece to painting

I have a 4mill cheetah set-up also need to know how much boot and how much run time on the 14-mil

who do you think makes the best drag frame and why do you like it trying to make up my mind on what style to go with seen a few run this weekened so im going to get one just dont know which one to get doing dirt drags solid frame or solid rear with working front suspension like the solid but with a working front suspension you seem to get better control down the track especially if it has some bumps in the lane your running in

went to the track on saterday and ran a few timesand no problems new tranny held up and so did the caliper i borrowed just need to get wheelie bar and cut tires and tune in carbs she held together finally gotten most of the bugs out

the d.m. cylinder has the cr500 intakes and the cheetah use cr 250 block off the powervalves