Coupelx

no your wheelchair.

Dismiss it he may, its a win. In your case why dont you build a bigger engine?

but probably have a far better dome design than he has.

The fuck happened in here?

I'd start with noss machine seeing as domes are what he does...

have you bothered to call anyone?

Another thing is people being cheap. If it seems cheap its junk. You have to pay to play!

i would quit half assing shit and have some domes cut for it. if it only took .004 to clean up a scratch i woulda filled it with jb weld and ran the fucker.

they have customer service?

have you had this at the dunes before snakehunt? there was one out there this spring that looked alot like that and it was hauling some ass.

Derps like this is why we can't have nice things.

the rest of us live in reality.

In b4 da shit storm.

German aluminum is shit. like not a little bit either.

I like the ones from alfies toybox.

tighten the carrier in the direction of rotation not against. Problem solved.

yea mine have a pretty solid "thack" when used hard. i dont even notice it anymore.

Mine rattle. Just how they are.

I bet if you spin it high enough you will feel it fall on its face as it runs out of the power band. If you are going to ride fast and hard alot like riding dirt roads its not a bad idea to leave it a touch on the rich side.

Leave cylinders. Remove stator and clutch side shit. Flip bitch upside down and remove bottom half. Like I mentioned at snakehunt, grease the lip of the seal before install.

As far as i know it isnt that they shit the bed its that they dont perform. From asking questions of those having issues it seems like the majority of his issue is shit or off the shelf domes. Its an incomplete package that doesnt put out. When i ported my stock cylinders i had it running pretty good but it just never seemed quite right especially in the midrange and coming onto the pipe. At the time i just had a milled stock head so i send a spare stocker to mull to have rechambered and it made all the difference in the world. the midrange and transition was crisp and it pulled high and hard for relatively low port timings.

i can vouch for this hoser.

pretty much sums it up. Their oring design isn't bad and one of the simpler ones out there. Domes are fairly 'spensive also.

mull will cut you a sleeper head for that i believe.