shee4speed

you running stock carbs with tors still? You have the choke tube installed?

sounds normal to me.

the boxes are tors system. search that.as far as the tightness of the throttle, could be the cable.

yfzcentral.com dude.

airfilter is all plugged up. :biggrin:

mayne,ming,mang,its all the same.

pickup gap okay?

where do you get triflow?

I would send out those jugs for porting and get shearers to match.You wont be dissapointed.

its mang! :biggrin:

never had a problem with o-ring chains in the sand.

wheelchair is good.

pm sent

crossover tube intact?

I dont know why your getting jetting suggestions when your float is just a little out of adjustment. Or it could be a dirty needle valve thats letting the fuel leak out. So,go ahead and pull the carbs off and check the float heights.Then while your in there,pull the needle valve and clean thoroghly. If your bike is running shitty,then move on to the jetting.Take a look at your plugs to see how shee is running.Good luck!

just ask the question. Then before long someone will answer your question. Good luck man! A "do it yourself" section pretty much is here, just search.

This thread is trippy! :shrug: and funny! :yelrotflmao:

I'm pretty sure it is never gonna work. You may be able to manufacture something though.

2nd dibs

send them over to Kevin at HJR and be confident of the outcome. Or Jeff at FAST.

X 3 I run that in my shee and my kids Blasters and it works great.

you shouldnt have problems with new equipment.How old are they?

you talking about the case or the part that hooks to the return spring?

definately remove the TORS and be done with that POS. then you can go from there.

that sucks you had the slides in wrong,all this time.Glad you got her running right.