alf44

Modquad coolhead $225 shipped Polished Billet Aluminum, anodized red, black or blue. One Piece Design Allows for Maximum Cooling without having to replace the stock studs. Separates Inlet and outlet to force water around the cylinder jackets for Maximum Cooling. 35% more coolant retaining capacity. What that means is better cooling which in turn means better performance. Comes with domes of your choice, orings, washers, and the acorn nuts. Available domes are: standard size: 17-22cc big bore 9 deg. 68.5 15-22cc and 4mill stroker big bore 13 deg. 68.5 17-22cc Blank domes available also. Coolhead repair kit $20 Any dome size $54 PM me with any questions.

Pm me what you want. Ill hoom you up. modquad.com anything you want from them up too 14% off dude. I also have a great polisher that can bling alot of your stock stuff. Im tellin ya man Ill take care of ya but I need too no what you want.

235 shipped. New modquad head and domes. 35% morewater capacity which means better cooling and better performance. One piece design uses stock studs. Pm if interested. 4 colors. Billet anodized blue red or black

Ill do 250 shipped on the fmf set. Fresh new flat black powder coat

Right on man. U have more extensive knowledge about the motors than me. I was giving the simple answer based on my experiance and what i read from all the posts on this thread. Sometimes the simple answer isnt good enough. Understood. No harm no foul. Im just one who goes wth experience, trial and error and just common Knowledge. U no your specs and the internals alot better than me. Knowledge is power! Peace out

Its not a stock bike though. The only diff. in that and mine where I had t5s, vf-3 and a dune port and rode with 20cc domes for 2 years with no problems. Hes on stock jugs NOT 78mm. If anything wouldnt you recommend he uses a 21cc too be safe instead of scarying him into thinking were all stupid and dont know what were talking bout and hes going too blow up his bike? Just my opinion.

You should really be ready too start parting before you post a thread like this man. You may upset some people if they want a part then you decide not too part it out. Also people arnt going too want too wait for weeks for the part too be shipped. Just think about it dude. It takes some time too part out a bike completely.

Welcome dude. you have come too the right place. Good people, great sponsors and excellent advice and knowledge. We alsp like too help you spend way too much money on your banshee. LOL! Welcome too your new addiction.

I have some fmf golds signature series with fresh flat black powder coat and silencers. would like too get around $275 SHIPPED. Pm me if interested. I also have some T4s without stingers with fresh pc also. $140 shipped. pm if interested. I will be out of town until saturday. I will return pms on Sat. evening. thanks.

anything else you would be interested in trading for. Pm me back would ya. Im interested.

Welcome dude. A good port job advanced timing and some bigger carbs would be a great start. You will notice a huge difference. There some great motor guys on here that are also sponsers. Hit them up when your ready. All of us site sponsors do are best too offer you great advice, pointers and services. So dont be scared to ask. You can always pm us also anytime. Welcome too your new addiction dude.

I think we have all said " I'm only doing this too my banshee and thats it. Im not going toobe like those guys that throw $10,000 into there bike." LOL. Ya right. Welcome too the HQ and too your new addiction dude .

there will be a group from here "longview" down there. I couldnt make it. bike is still in pieces.

you will be fine with 20's. I ran them on that similar setup. If you a little leary mix it half and half with some 110. I wouldnt sweat it.

PM SENT

X2 many many more options dude.

First off lose the taller haulers unless you plan on building a drag bike. I would personally go with the +4. Its what I run and we have some similar mods. Whith a good set of ten paddle haulers or extremes it will be fun and very easy too controle. If you plan on doing any more engine mods then look at the +6. In the dunes your going too have alot more tire spin so your not going too have the frontend comming up on you as much. Pm me when your ready too get one and Ill show you what I can get you. A complete chrome swinger with everything you need at a great price. Do your shopping though its a good investment and can be spendy.

I think this whole thing has gotten blown way out. Personally I think the bottom line was the fact you threw her out on xmas, because of a garage door being left opened. Like everyone else here has stated what kind of idiot leave his motor wide open in the first place. DUH! close it up and move it out of the way. Ya she fucked up but im sure you never have or blantently done something too get a reaction out of her. I mean why would you start this thread anyway? Just too show how much of an ass you are or what a big tuff man you are. As far as putting pussy on a pedestal I guarantee you guys that are backing this guy up and talking all macho about what you would have done proly wouldnt dare. I mean your telling me the girl you have been with for however long, lives with you, gets treated with respect, that you brag about how good she is, bla bla bla, you would have done the same thing? Come on. None off you would boot your girl over something so stupid. Shit happens get over it and move on. None of us are perfect. And do you really think the woman driving the nice cars and have lots of nice stuff just take it or expect it. I give my wife what she deserves. I want her too have the nice cars, she totes the kids around, nice clothes and jewlery fuck ya, I want too show her off as often as I can. I guess if thats called pussy whipped then fuck ya I am because I respect the women of my children and want her too be happy and want all you idiots too drool and keep saying.... man I want a woman like that. Huh? Well mabey you would or did but you were too busy with yourself too see what you had. It works both ways you no. Respect. It goes along ways once you learn how too do it. I guess all Im saying is threads like this really dont bring a good rep too the site. Woman bashing isnt cool. And dare I say too remember there are some younger kids that hang out here and look up too us and what we have too say. I dont want too start the are you going too ban your kid from doing this or watching that again, but those of you that dont have kids yet obviously dont understand. When the time comes though and you grow up, and start a family you will see what some of us are talking about and why we bring that fact too the table. " About younger ones on the site". So anyway let me have it now because I spoke my adult mind and said my piece. I tried hard too not comment again on this thread but I say whats on my mind and dont act like some tough guy behind a screen. I JUST MY .02. PEACE OUT

I can get you these for $165 shipped http://www.rockymountainatv.com/productDetail.do;jsessionid=98AC5923F0F6206583D32520A976482C.westring1?navType=type&vehicleId=497&webTypeId=138&navTitle=Tires+and+Wheels&webCatId=8&stockId=21550&prodFamilyId=8652#vehicleSelect Find some you like on RMATV and hit me up. Ill see what I can do for you.

X2 Im doing similar too my bike now. 66mm bore, 4 mill crank, blaster pistons, custom cut domes proly have too do some port timing. Its going too run strong for sure. I may stick with the single carb setup also. Havent decided. If I dont im going with duel 35's.

?? Ive always understood you can bore stock cylinders too 68mm??

what all do they fit besides the head? Sprocket hub? Etc.

I still like the modquad design. One piece for maximum effeciancy, uses stock studs, interchangeable domes,comes with orings, washers, and acorn nuts, 35% more water capacity, several colors too choose from And I will sell them all day long for $245 shipped with domes. Good quality product. I run all there stuff on my bikes. I choose too and haven't had any issues with any of there products. Hit me up!

5 days left too get this complete billet axle for $450 shipped. 28" gun drilled or 34" standard play axle. Retail is $599. I will discount price but not this much. I never sell at retail.You can get any type of hubs you want. Ive sold several different variations here in the last couple weeks. Requires a 40mm carrier that i will make you a package deal on if neededHeres pics of mine with my JDS brake rotor. 5 DAYS LEFT!!

$365 shipped. modquad choice of color lens and lockout. Im placing an order monday. U could have by saturday. Paypal is [email protected]