alf44

Well I got my second box today. He fucked me. I was supposed to get a complete running motor. MOst of you seen the first pics, well i got the rest today in a seperate box. The case was supposed to have a little chain wack, you be the judge. Missing the clutch basket and drive gears and who knows what else. was supposed to get blue plastics pictured on his bike and a polished grill that was on his bike. Well you see what I got. Paid for some polished MSR levers and sprockets, never showed. Loco please ban this thief. Eugene Housekencht is his name. I am out almost what I paid this criminal. $1100 of useless not what it was supposed to be junk. I see a felony charge in this kids future very very soon. remember these pics? the rest of the complete running motor

Why would you want to give all the tree huggers and people with way to much money who are building house on our dunes more reason to complain. Also you obviously have never been sound checked. Here in Oregon its $264 and they can take your bike if you act like a jackass when there writing you up. Its not going to make you any faster or give you more HP. It will just add to the already ridiculously long list of stuff us duners are always defending ourselves over. Just think about it dude. I love the loud pipes save lives saying too, but I also love whats left of our dunes and other riding areas. Nice lookin bike by the way.

ttt

Im considering doing the same. It says somewhere on there site that they can be used on ported motors but adjusting the port timing is recommended. Check it out and let us no how it all turns out when you install them and run it.

That is true I guess but look at it this way. Either way there going to make a buck by either being able to adjust the port timing or by saying you need new cylinders. Its not uncommon to add a 4 mill crank down the road. My motor was built by Cascade Innovations close to where I'm at. From the beginning of my build Chris new what I had planned. Eventually I wanted to go to a 4 mill. Based on that I've been told there will be no problems adjusting my motor for the 4mill crank. I guess we will see. I've had a good relationship with cascade And I hope they will not steer me wrong. In the future for my next build I will have one of our sponsors do my motor. At the time of my first build I wasn't a regular around here and was not a sponsor. I also do my best to buy from our sponsors as well.

Same here. Still waiting on the rest of my complete motor that was supposed to be all together. But instead it came in two boxes with who knows how much of it missing due to the shitty packing job. Give Loco a heads up on this. He's back and is aware of what's been going on with this seller.

I'm in the process off adding a 4mill to my already dune ported motor. There is no need to buy new cylinders. The port timing adjustments are minor and the cost is not bad at all. Less than half of the original port job. The reason I went this route and said mabey he may want to is to really really get to no your bike, the power, and how to ride with this kind of powerer. He could just jump right in and do it all at once and have a 4mill bike that has to much power and not what he may be ready for and then in turn not like it. I mean some people do like too build up to that type of power and skill level. To me its part of the fun of building and experimenting with new things. Again I would build up to that level and learn the ins and outs of your bike and what building a banshee too your likeing is all about. Its an addiction and it never ever ends. Just my .02

Will do Heath. I'm not on my pc anymore. Shoot me a pm would ya or ill forget. What are you looking at. There the golds signature series. They don't come with the signature anymore. From what I understand there more rare and proly worth more. I just need too finish my motor so I need them gone.

Personally I would get a port job done for your type of riding. Do a small bore and advance you timing too +4, pipes reeds, and ride that for a wile. It will be a night and day difference. after you get used too all the new power then go for the 4 mill build. Thats the route I went and im now in the process of building a 4 mill.

Wouldnt my fmf golds have some low end powere Heath. Proly cheaper to. Geez I need to sell them.

It was a half and half deal pretty much. I paid for my stuff and he even sent it a da before I paid. Then a few days later my buddy paid for the rest. I reall didnt even consider getting screwed by this kid based on all the time and the great deals and supirior packing jobs I did for him. As of now just an apology and a portion of the money I requested too be refunded that isnt even close too what its going too cost too rebuy these broken and damaged parts. As for pictures thats a good idea. Have a pic sent of the package before its sent. I assumed since this bike was just pretty much rebuilt it was still in the condition of the pic he posted in his thread. A nice clean bike. Thanks for checking this out Loco. Some of us new you were gone. I dont see anything else happening with this. He's still on a few other forums and this one selling the rest of this stuff. One forum in particular I here hes still bashing me and acting like I got a great deal regardless of the condition of the parts. Still no response on the cylinders that were supposed to be a .30 over bore. There actually a .20 over.

X2 on that. Then when your ready hit up us sponsors for great advice, parts and accessories. We all have our little niche.

Trade mark had some wheels for a real good price. Hit him up. I have some front stock wheels and tires also. I can get you a good deal on new from RMATV if you want too go that route.

Im putting a 4mill crank in mine right now.

Hey Karac just an fyi you can ship frames via greyhound buslines. Its the cheapest way by far and I have got 2 this way. just have buyer pay half. Hit me up when you get back. I have first pmt ready. thanks man

what kind of stingers are those and how much too 98632? thanks

I can get you new ones at a discount from Rocky MT. ATV. Im a dealer for them. go to there site find what you like and pm me the part numbers. Ill return with a better price.

ttt

ttt

BUMP

X2 pics please.

Can we please either start a new bash thread or just quit commenting on this kids post here. People like this just aren't worth the time. Thanks I would appreciate it guys. In the meantime I need too go figure out a new business plan since this guy says ill go nowhere with my business because i misused to and too. OMG! Ive proly made more last year doing this on the side than he made all year doing his full time job. It really doesnt matter what this kid thinks. He will be contacting me soon enough for some parts or service. Thanks guys. too, to, two, 2 does it really matter. What a waste of my time and yours. Now hes calling the owner of the site names and he hasn't even commented on this thread. Anyway done with this. Thanks too everyone who understood the situation and read the whole story and backed me on this deal gone wrong. The attempt has been made too make it right and some of the refund i requested was returned. as of right now we still need a flywheel and a stator for sure and proly some more stuff after the next box arrives and we start putting it together. We decided 2 go ahead and rebore the cylinders and get some new new pistons. After measuring them they are on the first bore, so we have plenty of life left in them. Thanks again everyone.

LOL! LOL! Your funny. Move on kid move on. Man I wish we could do something about some of the kids around here. LOL! BY BY.

Looks like you good use a lesson also. The first word in your sentance should be a capital letter, so should all the I's, its spelled oh not o and you used way too many commas. He just wouldnt returnany calls, texts or pm's Ill let my wife know you approve of her pic. Theres more in the premium members forum. Or there was. I think when i moved around my photobucket they got deleted. Ill get some up again. Theres some over at BC also.