Brooklyn350

Am I crazy has my rear end always been that way and I just never noticed. Just did a complete build and was adjusting the toe in on my front end when I noticed that the stator side of my axle (rpm dominator 2) is about and 1 1/2 inches longer. I did a search and the asymmetry of the banshee frame was mentioned. I can fix it with spacers just want to make sure it's normal. Already spoke to rpm confirming I have a banshee axle. Is there anyone out there with the same problem thanks in advance. Everything on the rear is new from hubs to swingarm

I think a lot of people would be surprised at motowoz pricing it isn't outrageous like pep and as stated it is a smaller company that pays attention to detail and Jim knows how to valve. After all a shock is a damper set up for your weight and style if it's not done correct your missing out.

Elka is a great quality shock they just flooded the market and slack off in valving. Some do get lucky though it's not like every Elka shock is off but most do need revalving and you will notice the difference

Motowoz is right up there with pep. Imo Jim gets the valving right on point when they come do your door. You have to wait a few months but well worth the wait. Not like Elkas which will come in a few days but the valving will be way off. I hated my Elkas and picked up motowoz from the 450 guys. Anyway I'm back in pa I'm going to have this thing on wheels tonight and get to tuning it tomorrow!! Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Yes just the inner hub

The chariot bowls are the older style with no nut or overflow they fit 33-35 pwks and pjs I think. $105 shipped just pay the pp fees The Hinson 8 plate inner hub is new as well $205 shipped just cover pp or send as gift My number is 3474895888 text anytime thanks I have a few other parts I have to list just don't have them in front of me and don't want to not list pics Sent from my iPhone using Tapatalk

Ended up getting a hernia at my job (fd) so the bike was on hold for a while. Ran into a prob with the swingarm bearings not lining up so the pivot sleeve would bind once installed through both bearings but JL will be taking care of it. After I get my swinger back its game on. I'll get some pics tomorrow of the goods Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

I got the tss Tranny bearings a while ago before they went out I actually wanted to write down all the bearing serial numbers and forgot to do it before I sent the motor to redline, they were all def an upgrade from oem. They were Skf bearings they could be purchased through any retailer I'm sure just have to cross reference oem bearings I guess. The wcr pro mod Tranny has been sitting on my shelf also waiting for a build, compared to stock def a lot of work done to it along with the micro polishing we'll see how it all works. Need to get back up to pa and get this thing rolling.

Pressure plate sold

Bike is located in pa and I'm in Brooklyn I had to leave so didn't get that many pics but next time I go back I will get a bunch of pics for the thread and will be completing the build because all the parts are there. Going to be a long travel 50th anniversary banshee. Just got the motor back from redline racing, Cam is awesome. It's a 421 serval ported by redline with all the bells and whistles, tz max load bearings on a hotrods 4mil 115rod trued and welded crank, full tss transmission bearing upgrade with a wcr pro mod Tranny. Going to run on 50/50 race has cant wait to see how it rips. More to follow in a few weeks gotta pay for the damage I did to my bank account so work is getting in the way lol Sent from my iPhone using Tapatalk

Brand new just opened save a few bucks if your in the market for Hinson stuff 8plate inner hub $220 Pressure plate $130 Payment through PayPal fees covered of gift. Will ship asap thanks Ryan pm or text 3474895888 Sent from my iPhone using Tapatalk

How's that yellow maier front match up with oem?

Can you make these in minus lengths for the guys using ac nerfs with relocated pegs or blaster pegs thanks

Tank sold thanks

Forgot to mention I would like the PayPal fees covered on all sales thanks Ryan

Clarke tank 5.5 gal brand new $200 shipped Duncan bumper has been heated and straightened in one spot as you can see in the pics $100 shipped Roll front end great shape stickers are a little dirty on the front bottom arms as you can see in the pics they are not chipped under the stickers. I ran skid plates so there are small spots on the arms where they were rubbing but the front end has about 15 hours. All ball joints are like new shocks are like brand new as well Elka stage 4 set up for 180-200 lb xc rider can bump clickers up for mx like I said about 15 hours on set up will include skid plates if you want because they are custom cut yfz450 plates and won't work on anything else . Shock length is 16 3/4 eye to eye 1550 shipped Pm me or text 3474895888 thanks Sent from my iPhone using Tapatalk

SOLD and shipped thanks

Reeds and cages are like brand new barley used 135 shipped gifted PayPal or PayPal fees taken care of thanks. Cell 3474895888 Ryan Sent from my iPhone using Tapatalk

Magnum clutch basket from f.a.s.t. Yes vf2s and 3s

4 mil spacer plate I got off an engine I parted out $10 shipped 347 4895888thanks Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Banshee oem magneto not a lot of hours at all just has a bunch of surface rust because I had a leak In my stator cover. The surface rust is on the outside nothing on the inside purely cosmetic works flawless $80 shipped Sent from my iPhone using Tapatalk

All bearings are good and tight crank doesn't have a lot of hours on it at all. The right web got a little discolored because I had an antifreeze leak using dexcool for one ride because my cool head wasn't torqued down 100% when I first put it together didn't effect anything at all. Nipped the problem in the button an abandoned the dex cool ideal. I bought the crank in like 2004 it took me a long time to build my banshee and I ended up not putting a lot of hours on it and completely redoing it. I would say the crank has like 10-15 hours total. So it's an older style hot rods crank don't even think they came trued and welded at that time I had it trued and welded also it has 8 ball bearings throughout, don't know if that standard anymore. $225 My number is 3474895888 ask me anything thanks for looking Sent from my iPhone using Tapatalk