theshee

Yup, all +6, others are raptor arms

well.... Here they are... Guess I will hang what I dont use on the wall for future builds...

I would just spray the crank down with some WD-40 to store it, just so it doesnt rust or anything. Was in on gas or alky? If its gas just spray it down with wd and forget about it.

Cody, get a pro design tether kill switch. Hooks to you so if you come off your bike shuts down, and they work nice. I ran one on the 10mil and have one on my new bike too. I like them because they part that hooks to you hooks into the killswitch nice and tight, tusk ones are loose a shitty, i hated the tusk one I use to have. Get the pro design.

Get the 33s bro... 35s would be a bit too much for your motor up here at our elevations. The 33s will also work fine with a 4 mil once you get it thown in there, will make one nasty hill bike for sure. Hit up Jeff and see what his price is, when I got mine he had the best price by far.

May be a couple weeks before I can get them done. We need to finish up a couple other sets before I can even start on this project.

421 on Alky is spoken for so it is sold pending payment..

Yes I did.. Jeff is my banshee swinger guy from here on out. Fast, great quality and the best guy around to deal with... I need to PM him about some stuff too, Jeff from havoc, if you get this hit me up with a PM, got something for you to think about...

Just checked the tracking #s, they are UPS and are on their way!!!! Fuck yeah, i knew they would get here, patience paid off!!!!!

I had an email with two tracking #s from Tony when I got home from the show. We will see if they are real or not, I dont know if they are UPS, fed ex, DHL, or postal...

$270 shipped to there. Sending stuff outside the US is a pain so i will do it for that price. Seems like the second they see it isnt inside the states, the shipping price triples. But I will do it for $270 let me know.

wow... never had that happen. If you need some clutch springs I will send you some, I have a whole shoe box of them. Also, your plastics are on their way!

Yeah use and angle grinder to cut the mounts, then just use sandpaper to clean up the grind marks.... way faster, ive done 4 frames that way and you cant see where any mounts were.

The 421 I have for sale in the for sale section made 88 horse at 5200 feet elevation last year.... 421s are strong motors.

I did stuff similiar to travis. Used aluminum strap to the footpeg, with rubber on both ends where they mount for cushion. worked really well... Mine were both out one side though so I only had to have one. RDZ has a really good rubber mount Rob sends with the pipes for the mount too...

If someone came up to me with that attitude I would get off my bike, draw a line in the sand with my foot and tell the fucker if hes got a problem to cross the line... I hate stupid people and it seems this world is getting flooded with em.

When do all these parts need to be done? I would be more then happy to do the plastics for the bike, I have some extra ones here at the shop and could do a BHQ theme bike... I would race cut them, is that OK?

I will get everybody pics today. Thanks Jason!! Odaen- I beleive they are on the stock bore, never been bored before but I will measure then and check for ya.

BUMP. 421 comes with a lockup clutch and cover too! Need this stuff moved quick!!!

I agree, JD is one hell of a guy. I sent him a ugly sketch and he made me a FLAWLESS grill, added the finishing touch to my bike. thanks JD, look forward to doing business in the future.

I need some extra $$ for my stupid idea I have so i am going to part out this motor I have laying around. I have a set of cases, No breaks or anything they are mint! $200 shipped Stock cylinders, need a bore, never been ported or anything $200 shipped Stock tranny, looks to be in great shape- $150 shipped (comes with the forks, drum, everything!) Stock Crank, looks to be in good shape- $110 shipped. I will sell all this seperate or will sell it all together for $625 shipped, could have a running motor with a bore, some pistons and a head. ALSO FOR SALE K&T 421 cub on alky. Brand new pistons, coolhead with 18cc domes, stock tranny, comes with everything - the intakes. You would need carbs, and intakes and you would have a running 421 cub on alky. Very strong motor, belonged to a good friend of mine, we just got the motor from him. My bro needs some extra $$ with the baby on the way. $2000 shipped to you door. I will get pics later, but you guys know me, I will not sell a shitty part.

Bump for a Great seller and HQ member!!!

Have you adjusted the shifter? Also, it should be fine, that shit will be turning when you are riding so it should be ok, but its hard to say without seeing in person. My 421 was the same way, ran the shit out of it and never had a problem.

Pm chaseatmiamiatv he does them and they are nice.

I use www.bikebandit.com they are quick as heck, thats why I use em.