530grafix

ya i am too lazy.......thats why i don't even capitalize my typing.....

inframe for inframe

you should sell the cub so that i can be the fastest.......

does anyone know about power jets. just wanting to know if they are worth it. and are they better that dial-a-jets? thanks tony

just as it says im trying to see if anyone wants to trade big bores for some small bores

jesus moneybags, how many shees you need!!!

thats what i use. love it :thumbsup: i did my breakins with it and never had any problems.

got some give me a call.

can anyone give me a good starting point for kiehen carbs @4000 ft (sand mountian) nv. i have recently done some major upgrades so my sig is not valid yet. mods are as follows; 421 cub :biggrin: 20cc domes , timing at +7, reeds, cpi small bores, pods, and 39mm pwk carbs. thanks.....tony

i have a set on fleabay with 2 sets of pods and outerwears and intakes and lots of jets

i may have the whole top end sold, hopefully thats the money for my carbs! if not I'll let you know in the next day or so

yeah, he's a little bent now, he thought he had one up on me..... deeeennniiieeeddd :biggrin: now its me and moneybags. dave is gonna ba a 396 right? and i am a 421 right. any suggestions on jets. im gonna go with the 35s for now.

i took the website down due to the fact that i was getting isocyanate poisoning and was on the verge of goin to the hospital several times in the past 3 months...

got the 4 mill from john at sand toys unlimited today, probably not gonna run alky...

I DIDNT MEAN JEWS I MENT JEWELS SORRY NO OFENCE.

i finally made the jumpfrom the drag ported stock cylinders to a 4 mil cub, r-1 clutch, and 20 cc domes, 39mm carbs :biggrin: :biggrin: :biggrin: should be here friday . then ill have here back together this weekend, do the breakin and have it ready for sand mountian halloween weekend :biggrin: John at sand Toyz Unlimited is awsome. very knowledgable and very reasonable!!!

anyone have any 33 or 35 mm pwk carbs they want to sell?

in reno

no probably 2 months out on the 4mil and alky. my builder is on alky, drag ported, 4mil and he dynoed 93 hp! you goin halloween? we have a large group goin, moneybags and dave i are goin to.

how about Ministry, "just one fix" or"burning inside"

not very funny. i hope your pissed when a set of stock cylinders beat you!!!!! heheheheheh

yes stock cylinders, and the exhaust ports are raised 3mm compression is 187 at sea level and 162 at sand mountian.. my builder recommends 22-11-8 8 paddle or 9 since im doing a 4 mil crank and going to alky.

50/50 my builder sayd to run a 13/44 combo for the sand.

does anyone have any suggestions for paddles im tossed up between 22-11-8 8 pdl haulers or the 21-12-8- 8 paddle haulers. also am i better off getting extremes or more or less paddles. mods are in my sig. gearing is 13/44 an i weigh 240. thanks

does anyone have any suggestions for paddles im tossed up between 22-11-8 8 pdl haulers or the 21-12-8- 8 paddle haulers. also am i better off getting extremes or more or less paddles. mods are in my sig. gearing is 13/44 an i weigh 240. thanks