530grafix

someone should snatch up the digitron. Their worth their weight in gold!!!!! bump for good products!!!!

I run a digitron and like it very much!

your compression dictates what fuel you run ( as far as pump, mix or race) I run vp110 my comp is 175 @ 60ft asl.

i have tried switching the carbsand no difference. Ill try snother leakdown test again. i did try a leak down test initallly and it was fine... ill try the needles next.. thanks for all the responses.... ive been busy, my 10yr old was diagnosed tuesday night with type 1 diabetees.

Runnin race fuel. and timing was @ 7 so I backed it down to 5. screen is also clear and new fuel lines. thanks for your prompt responses.. oh ya CEL needle was originallly on middle clip. Pickup gap is also at .030....

I like to keep my business local. give john safarian at call @ sand toyz unlimited!!! customer service is the best!! after i ordered my cub from him, he called me a week later and asked how i liked it. told him i hadnt built it yet ! he replied whats takin so long....A-1 GUY :thumbsup:

no no overflowing. ill try switching the carbs tomorrow. My neighbors will call the fuzz if i start it again tonight!!!!!

pm sent!

Okay heres the problem. I have tried everything that I can think of and now I'm looking for some help from all of you! First Its a 4mil cub with 35's,shearers, comp 175 60ft asl. Heres the problem.......Had 158 mains in this winter. temp warmed up and went to 155's ( 48 pilot 1.5 turns out) seemed a little fat with the 158s. took it out this weekend, grabbed 2nd, then 3rd. it fell on its face like it was lean. so I fattened it up on the needle one clip. ran good! rode for a few hrs, let it sit, took off again and it felt like it was lean in the medrange again! AARRRRGGGGGGGG! What the fuck!!! im stumped. I covered all the basics, mic'ed the float bowls, comp test, leak down test. And now the next problem........I have a digitron (egt sensors) in the cub and im getting a 600 degree difference from the left to right side. wide open throttle i get 250ish on the left side and 900 on the right. I tried swapping the sensors from one pipe to the other to see if i had a bad sensor, but the problem persisted. As for this problem i checked the ignition, and the plugs. both were fine. So if anyone has any other ideas feel free to shoot them over! thanks, Tony

As it says. looking for someone who is over paddled and wants to trade my 22-11-8's for some 9 or 10 pdl haulers in good shape. mine only have two trips to the dunes..willl post pics if needed. Thanks, tony

Some jackass will probably eventually buy them.... :thumbsup: Ebay is great if your tryin to screw someone!!!

I run redline and love it! we get it here for 36.95 a gallon. :thumbsup:

thats what Im talkin about! thanks Kaos!!!!!

FU I was just stating my experience with a product!!!!!!!

Anyone got some trailtech lights sitting around?

got my swinger from there and the powder started flaking after 2 months!!

If anyone is interested in meeting up on sat. april 12 pm. me for directions. myself, moneybags and some other guys are going to feather river blvd and country club lane. Come one come all!!!!

:thumbsup: Bump for a good guy and good runnin shee :thumbsup: What the fuck Dave!!!!! Im ok with you beatin' me, but remember you'll never catch Beau!!!!!! :yelrotflmao: was gonna call ya and see if ya wanted to run this weekend but I forgot it was apart!!!!

I only have a clean up. im under paddles gonna get some 9 paddle buffs. As for the + 4 I like it , the front sitill comes up alot. I like to be suprised, thats the fun of it.. no regreats at all....

I run my cub on fire roads, draggin, and duning. I have NO complaints. I love it and would do it again and again....

check out gtthunder.com hes revalving and respringing for my weight and +4 swinger for $175

order the chokes from keihen's website. and for carbs, it depends on the type of riding you do. i run 35's on my 4mil cub but its a duner....

I RUN COOL AID AND COOLANT-ALL 50/50 AND IT WORK GREAT!

USE A SPRING PRESS AND REMOVE THE COLAR. NO NEED TO UNSCREW ANYTHING . JUST DID MINE YESTERDAY.

I used the green compound. they say its for stainless but works great on aluminum. :thumbsup: