ohiobanshee

You can turn the clip to cover the hole. If the threads are striped helicoil the hole.

Shit I've been married almost 9 years,she still thinks everything should evolve around her.If I am not doing what she thinks I should be doing I get bitched at.Let me tell you I get bitched at a lot. :biggrin:

Call Jeff at F.A.S.T. his heavy duty clutch kit will hold it.

Which spiders,slt's or a3's?

What handlebar grips do you guys like best.

10 minutes from home i'll be there.

800 maybe 900

Wish you a speedy recovery.

You take any less?

AZCUSTOMQUADS Give tim a pm he can make a set of custom j-arms.

Different parts of the country bikes sell at different prices.Around here they go between 2000 and 3500.

Some of newer lt's have a safety switch down by the foot brake.The brake has to be set before it will start.

I'll take the chain rollers and slide.

Go to your local auto parts store and get a roll of gasket material and make your own.

How to Clean the Toilet ... 1. Put both lids of the toilet up and add 1/8 cup of pet shampoo to the water in the bowl. 2. Pick up the cat and soothe him while you carry him towards the bathroom. 3. In one smooth movement, put the cat in the toilet and close both lids. You may need to stand on the lid. 4. The cat will self agitate and make ample suds. Never mind the noises that come from the t oi let, the cat is actually enjoying this. 5. Flush the toilet three and or four times. This provides a "power-wash." 6. Have someone open the front door of your home. Be sure that there are no people between the ba throom and the front door. 7. Stand behind the toilet as far as you can, and quickly lift both lids. 8. The cat will rocket out of the toilet , streak through the bathroom, and run outside where he will dry himself off. 9. Both the commode and the cat will be sparkling clean. Sincerely, The Dog

Looking for a set of uncut black front fenders.

I don't know if it will work,but I have a warrior shock for 25+shipping.

Long time no see.

What kind of truing stand is most popular? The kind that centers on the ends of the crank or the kind that has two rollers at each end and the shaft rides on the rollers. eric

I mounted mine to the skidplate tabs on the bottom of the carrier,than I ran a piece of tubing between the frame rails where the grab bar bolts and welded the top bar to it.

No motor.Have a factory air induction hood and good trim parts.

I have one for parts,if you need any.

I painted a set with high temp ceramic brake caliper paint. It held up really good.

http://www.bansheehq.com/forums/index.php?showtopic=112670

http://motors.shop.ebay.com/merchant/eric6...armrsZ1QQ_fromZ