yyz

pretty much exactly what he said... i was about to post the same thing... although i would be careful on the timing... 3-5 degrees... more timing = more torque but less topend... and, more timing leans the motor a bit as well... use it as a tool to dial the bike... yyz

imo, lose the tr6's and hook up with some t5's or cpi's... tr6's do have good bottom end and are a fun pipe to dune and trail with, but they run too short out on the top... they just don't have the pull ya' know... yyz

pm sent... please check... yyz

i have a set of chrome t5's for sale... light use for two seasons... overall in excellent shape... some bluing at the head pipe, but no dents... 425.00 shipped for the pipes, stingers, and silencers... if interested, pm me your email and i can get you some pics... yyz

would that be 75 for the remaining 3 a-arms shipped?... do you have pics?... what year are the a-arms from?... have paypal... thanks, yyz

i need a right upper a-arm, stator cover, key switch w/key, footpegs, and a taillight... let me know what you have... i have paypal... thanks, yyz

do you have a pic of the dent?... have paypal and am interested... thanks, yyz

need right upper a-arm, right footpeg, and complete thumb throttle assembly... have paypal...

with stock porting i assume... t5's w/toomey needles, k&n clamp ons, +3 degree timing plate, mill the head .030, 13-41 gearing, jet accordingly... you'll be suprised... yyz

yeah... who needs fenders... i aced mine right before labor day weekend... hey duner440... didn't i see you at ls last weekend? yyz

I have a set of 17cc Small Bore Noss Domes that were used once for about 2 hours. No flaws whatsoever, spark plug threads are perfect. Will also fit Pro-Design Cool Head. Great domes, just gave me a little too much compression for my porting. 60.00 shipped lower 48... PayPal or MO accepted... Thanks, yyz

i had a similar problem with a 4 corner score during breakin... mine were .020 over wiseco prolites... called wiseco and they said their tolerances are very good weight-wise and that i could just replace one piston with no problems... so i did and have had no problems... that was about 6 months ago... banshee pistons from wiseco are not sold in balanced sets... according to wiseco all of their banshee pistons are within a half gram weight-wise... i would just make sure you mic the new piston and set the appropriate clearance when you re-hone the cylinder... i would of course put new rings in as well and clean everything well too... you could also call wiseco and see what they say as well... yyz

You can get a 2007 Banshee in Canada.

hey all... am looking to buy a pair of 16 or 17cc small bore domes for my noss head... noss or pro-design will do... let me know what you have... thanks, yyz

SOLD yyz

got a brand new set of banshee 20" stock tires on stock wheels in mint condition... have 4 or so hours on them... 150.00 plus shipping thanks, yyz

am still looking... but now only want radical white oem from a 2000 or 2001 banshee... thanks, yyz

this is my son' s frame... is still for sale and can be shipped... we crated it for a quote but the guy has backed out for whatever reason... 225.00 plus shipping... contact me or my son... thanks, yyz

bumpity bump

I am in need of a banshee front fender to race cut... can be race cut already if it is cut out beyond the first seem outside of the side bolt mounts... or, can be lobbed off in that area to save shipping and then i can finish them... I would prefer radical white from a 2000 or 2001, but can also make the 2004, 2005, 2006 bright white work as well... Thanks, yyz

i have a mint new set of stock front wheels and tires and mint stock rear wheels and tires... the set has about 4-6 hours on them... all sand... came off of a '06 banshee we just bought new about 5 weeks ago... yyz

pretty sweet... http://www.yamaha-motor.ca/products/produc...roup=A|&LANG=en

we do it here mostly... no timers and pretty informal, but fun none the less... centrally located in nebraska... http://www.nohva.com http://www.nohva.com/wallpaper/airview.htm and... http://www.planetsand.com/ubbthreads/showf...0/page/0#493169 yyz

i have a similar problem with that website... only happens when i set the keyboard in my lap however... lol... yyz

i agree... but i like the idea also, of not changing too many things at once... didn't like bending the clutch linkage down, but i was careful... and, after milling the carb bowl plug, i have about 1/8" of clearance... yyz