sandman121383

the reputation of the pipes themselves won't change for those who know and have seen them perform. i agree with some of the guys on here. bottom line it's very unprofessional of u guys to do this. call eachother and talk about it. hey man u wanna take vacation and do 30 sets go for it and prove urself to everyone who doubts u. this is business,and business is just that, it's not supposd to be public. u guys are starting a battle over this business and we shouldn't have to hear about it.

call a local ATV salvage yard or somethin they USUALLY have jets in stock of all dif sizes. hell my local dealship had tons of jets n just gave em to me.pilots and mains till my bike ran right. i would def rejt b4 u went ridin. if it's a tiny bit on the lean side u could do some damage fast i'm sure some other guys can tell u horror stories. i had the urge after gettin my shearers and it took me some time to get it right and ur better off makin sure ur jetting is good or at least a little bit rich b4 u take her out for a few hours. id play it safe

THAT'S SICK AIR FOR A GRIZZLY~!!!!!

i didn't see them in the "for sale section" i'll pm him or somethin. i'd like to get one . it'd be great for trips. instead of bringin jets u can just turn the knob when u get there powerjet if u read this lemme kno cas i want one man. i have a trinity 2 into one intake with the 35mm carb u demonstrate on in the one link.

heres a few pics theres no pitting. i took it off and never cleaned it up. i'll even refund if u got it and wasn't happy. but i only pulled it to put on a cool head. any takers? i'd rather sell it here . if not i'll try planet sand or ebay. just was hopin i can help a HQer out 1st.i can take better pics but it's in great shape. was never shaved or milled. feel free to pm i also have stock carbs with and without TORS and lower a arms and tie rods if nebody wants them. traades welcome too

make me a fair offer and it's urs. i'll post a pic if i get some replies. its in good condition.

powerjet?

anybody have a list of states that allow atv's to be licensed for the road? i'd sure as hell spend the $ to legalize mine!!!

i never seen anything like those before. i got a single carb setup. would thaty work good for me? i plan on porting and advancing my timing this winter. having that would be nice!!! how much for just one powerfet?

buy sidewinders and be done with it. u'll prolly never wear them bastards down .

Head!

PA rider here. i run realtors and have had good luck in the snow, after winter rebuild and all the stuff i'm doin she isn't gonna see any more snow though.

pro design makes a nice impeller but mod quad's looks the same and is cheaper. i'd say check out modquad! i'm gettin one soon myself.

looks like that chain has alot of slack in it!!! hey man i say go for it. i like the dual shock idea. R&D is what it's all bout, especially when it comes to havin an edge on competition!!

everyone's gonna tell u NOSS heads. i got a pro design myself cas i got a great deal on it at a dealership since it sat there a year new in the box with 2 sets of domes. but next time round i'm goin to dave. nice work plus his fit stock studs (if urs was stock ). all n all he's the man to talk to!

u might have to gear down even lower to compensate for such big rubbers out back. do a search for speed caculators. try n find a gearing with ur size tires to match a stock gearings speed with a set of 20's or even 22's maybe it could give u an idea of how it'll go. nebody else have ne feedback

. . thanks for chiming in BenB. those FAQS are great

NETHING FROM PURE SPORTS. they make the best tires hands down. i run realtors right now for climbin and draggin but i ride all over with em and i like them i'm gon na run bandits when i burn these off.

i'm goin just not racin. if i had the cash i'd go represent ! i just rejetted my bike and it's really runnin great right now! i'll take some pictures when i hea down! neone else goin?

as long as it's hypoid gear oil ur fine. i use 80wt gear oil. supertech from walmart. 7 bucks a gallon. just change ur oi often. its cheap insurance. i think i use close to 2 qts. little extra can't hurt.

ur lighting coils on ur stator could be bad. get an ohm meter and test the yellow wire to the black wire. ur readings should be between .26 and .38 while ur checkin the wires check ur pick up coil by checkin the white/red to the white/green. it should be between 94 and 140. finally ur charging coil (green to red) should be between 13.7 to 20.5. it's easy. just unplug the connector that comes outta the stator side cove and use the ohm meter on the inside of the connector . let us know what u find.

hop on that website u guys from in and around PA. i might go but dont' think i'm goin to enter due to all the fees associated with gettin to line up. ne of u guys goin? check out the link and scroll down a little ways then click on "Times for ATV Participants" just thought i'd let u all know about the event. latr guys! http://www.harfordfair.com/pages/1/index.htm

hazleton is a big hot spot. just load up, drive down and u'll see people at the gas station right offf the 81 exit. ask them to tag long and u can go unload somewhere. shamokin is great too. theres more people on here that i'm sure will give u some spots. up round close by me (scranton/moosic) there's dickson city, jessup and carbondale. but carbondale is patroled from what i hear. too bad cas it's beautiful up there, theres these huge windmills that generate electricity that i think the state sells to NJ. nice ride. nebody else form PA know ne spots? are there any dunes or beaches out in NJ or close to PA that are ridable?

i got a set from custom creations out in CA and i got 2 rides on them, still dialin my carb in (it spits a litle on top in low gears) and the chromes flaking AGAIN. i sent them back once already and am not doin it again i lost half my summer waitin for my fuckin pipes. buy them from jim or somebody else, and get them bare and plate them locally. i wish someone on here knew matt personally or kevein at CC and would tell them their chromer blows. i paid 508 shipped to my door but got wacked shippin costs. so i'm almost at 600 for some pipes thats gonna look like shit after a full ridin season i bet. bottom line i love these pipes but he screwed me on chrome. when i returned them they didn't strip them they just plated over them. and i can't get thru to them to even complain. learn from my hardship man.

he gave me a call, it was the one slide stuck wide open. u really had to jet for the valves j madd? wow. well glad to hear her runnin good again man. turns out his air screws were both off too.