mnduner

sweet thanks

i was reading and seems everybody says greydon style intake for single carb is the way to go. i say wallrat say he made his own if anybody has made one please post pics and explain if and/or why they are better than triniy. i tryin to get n edumacation

you try it first and tell me how it goes

just thought id see if anyone on here would help a new rider out. i need: one chain adjuster one rear hub one motor mount bolt set of nerfs black or red nets aftermarket swingarm skid black front shock covers exhaust clamps all black seatcover exhaust hangers all four wheelnuts and washers

wheres the head gasket leak? i cant see any thing obvious

pots fine to each their own. my best(worst) drunken night. me and my buddys were working on his mud truck in the drive way driving vodka +cranberry and redbull jag. apparently i blacked out ...i cant say for sure but from what ive heard this is how it went down.... were sitting drinking and i hear a popcan rolling down the street so i jump up and take off running... straight into the front of his e-150 about 4 feet away ..i knock myself out and rolled down the driveway into the street where i lay for about 5 minutes before they come to check on me my eyes where open and pointing different directions. so they each grab an arm and drag my ass up the driveway litterally. my pants slid down and ended up with a 4" circle scab on each cheek...what great friends

haha i love to laugh at other peoples stupidity. cause i know youll all laugh at me too. my moment of clarity when i decided always to wear a helmet happend when i was on the cr on the lake riding wheelies all over the plowed road. an expedition pulls off to the right of the "road" and his brake lightsand reverse lights flash so i know hes in park. dont know what hes going to do so i decide to rip by him fast and get out of his way(wise decision right) so i drop a gear and pop a wheely im about 10 feet away from him and pulls out infront of me. i grab the brakes and ride an endo strait into his driver door. smashing my face against the window. studded tires fucking gouged the shit out of the door brake lever dented and scraped. bent his running board down and knocked my ass out for like 60seconds. i come to and hes all concernd and shit im just go off on him for being a dumb fuck and not seeing or hearing a red dirtbike in the middle of the snow. long story short i broke my middle finger, bikes fine he got $2300 damage to his new truck. ha take that fucker!!

word the HQ fucking rocks its like a smart older brother without all the beatings

your my new idol. fucking sweet setup got any pics of the rear?

ok question is when i took apart my banshee it had a round roller on the swingarm. all i can find are the teardrop shaped sliders. will this work?or can i find a roller for the swingarm? thanks for anyhelp

that shit is funny wouldnt you have to know his real name inorder for his reputation to be damaged? personally i think is puss ass bitching messages damaged his reputaion more than anything else any body could have done i think some people should die and i should be able to decide who and when

i know that for street bikes you can buy anchors that bolt into concrete to lock you wheels down to. how about welding some d-rings on the floor of the container and lockin through the frame dog sounds like a good idea tho since you have so many problems already

thanks for the info where does the needle say what it is?

i have t5 pipes, stock motor, trinity single 35mm and im removing the airbox to put on single k&n cone. what should i be looking at for jetting. im at about 800-1000 ft. im asking because when i got the bike pipes were blue all the way to silencers. and i dont trust anything the previous guy did. he destroyed the axle and cut the carrier down so a seal wont even fit on one side!! wtf oh well i guess i cant complain for under $900 by the way i have a stocl axle and carrier for sale

lean mixture is high internal temp and rich is low internal temp but high exhaust temp from extra fuel burning in the exhaust

50 days!! woooooooooo woooooo wooooooo sound like a big choo choo train

im new bansh owner and im rebuilding frame up for pretty much dune riding only. questions: when installing a metal wp impeller what all needs to be replaced? bearings, seals etc. i want to start fresh so i will be getting the cylanders bored. it is stock bore, how big should i go? will i get much gain from going big or should i just go a little over thanks for any help

i bought it only 800 shipping

what is the best place to find new razorbacks or mohawks? also whats everybody think about the sand star tires with two ribs?

sweet thanks. what about a pre filter?

i just got my banshee and it has t5s that burnt through the airbox sides so the filter doesnt fit in right. should i get a new box or just get a pod filter or whatever for it. also what is the best to get ive heard uni and k&n. whats avail for the single carb and where should i look. thanks

thanks i guess im gonna try and fine some mohawks. any one want to get rid of some?

searched and couldnt find much. im a new quad owner and am wondering about how much of a difference mohawks or smoothie fronts compare to knobbbies. also does front wheel size make much difference in sand? what size should i run. thanks

im gonna be there. 02 banshee,crf 450 cant wait. itll be my first time at st anthony. hows the weather there usually?