LiftdT4R

Stock arms? Ball joints are probably shot, this is one of the reasons I bought aftermarkets with removable ball joints. You can try holding them with vice grips if you can manage to get them in there and not ruin the boots, or like they said above, try turing the wheels all the way to one side.

Yeah, I got 2 sets of billet clamps on my upper rods, I put them on the front of the bike, I don't know why though, I'll probably put them on the back of the arm sooner or later.

Got any pics of the rad? Lemme know, I'll probably take it.

It's average depending on where in the states you are. I've seen bikes with mods for about the same price around the east coast.

Whoa yeah, on a bone stock shee, I would expect you to lose. Pipes, filter, and jetting are going to be your best bang for the buck. Might want to search around here as this has been covered a lot, but an adjustable timing plate might be a good idea too for a little more low end.

That's the oldest story in the book, and I call BULLSHIT. I wouldnt buy anything from this cat.

Little sarcasm there.

Awww come on John, didnt you start off on a Blaster? :yelrotflmao: Throw some Hoosiers on that bitch, and a pipe, and call it a day, it's just as fast as any banshee. :yelrotflmao:

Bump for ya chase, great guy to deal with.

Trail banshees. For real, who the hell rides a banshee on trails???

No he is selling an RZ engine, different animal. E-Mail sent!

Awesome guy to deal with, bump for ya!

Hell yeah! With the right rider, that shee will make it through 90% of the stuff the grizz will.

Listen to this dude! They are the shit, I thought I was really fuckin good, then I bought a carb tool to check it out, turns out I was off by a lot, the bike ran a lot stronger, and I expect the build on the motor to last a lot longer too.

They are the same as the PIAA ones RS sells, much better then stock. If you buy the Hella 500s, you will need the rbacket that RS sells with their kits otherwise the things will wobble all around. If you call RS tell them you bent the bracket and you need a new one, hey should sell you just the bracket. Here's a pic of my build with Hella 500s, http://i38.photobucket.com/albums/e130/JHu...uild1017072.jpg I like the look much better then the PIAAs.

Ohhh, I think I get it, basically the needle sits ebtween the plastic piece and the slide right? Idont know why I was having such a tough time getting everything together, they are 28mm PWKs if that makes a difference.

By number, do you mean part #? Also, there's 2 bearings in each hub, and they are both different because the spindle is tapered.

Whats up? I was putting my PWKs back together to put on my bike today. I was wondering is there anything that holds the needle against the slide? The way I have it now the needle is in the clip, and just sitting on top of the plastic piece that goes inside the slide. I thought there was something that holds the needle against the slide, but maybe I'm wrong.

Holy shit!!! Gotta love the HiLux, those things will last for fucking ever!! Sweet ride man, it must be a little scary to have the RHD on the highway though.

I have those on my bike now but I havent ran them yet. From what I know, the rezzies are more to help with fade, and increase the longevity of the shock. I had Works with remote rezzies and all the stuff they offered, and I never changed anything but the ride height, and they lasted me 4 years, and still had a full charge. I figured Id give the Elkas a shot because everyone raves about them, and they have a higher price tag. I would definately go with +2+1 arms and shocks like that. The YFZs are nice for recreational riding, but after all is said and done, they arent made for a banshee like +2+1s and the right shocks are, plus the front end sits lower.

Hahahaha, I love the screen name, that's a good one! Bump for ya samc!

Guess you didn't get either of my PMs

Nice Toy!!! Goota love the old FJs SFA and all. I got an 85 Runner and a 01 Runner, bulletproof trucks.

Yo, it's hard to tell from those pics, but what kind of shape are those PTs in, any dents? how big? if you got a better pic, hit me up. Thanks man.

Aight, second question here, I'm going to stop being cheap and buy the clamps. I have LRDs on my one bike, and Paul Turners on my other, anyone know who makes the LRD pipe clamps, or else what pipes are the same size. I didn't seethem on the Cascade site. Thanks! :beer: