FasterThanU90

youre at almost 5k ft and you put bigger jets? wrong go smaller. are your plus fouled now?

youre at almost 5k ft and you put bigger jets? wrong go smaller. are your plus fouled now?

its a bad main switch probably do u have an ohm meter

There should be two connectors .. one with 2 wires going into four and for the main switch, the 6 wire connector is for your handle bar control and needs to be plugged in to the rest of the harness.. lift your gas tank and see why its not plugged in.

thanks guys!

okay

i dont know thats stuff toxic.. plus i had direct sprayed the stuff with compressed air brake cleaner and it was hard to spray off i had to actually wipe it off.. Amsoil sells an engine and transmission cleaner.. maybe that would work better.

im going to replace all the worn parts under the clutch cover and keep a close eye on the oil quality ..

Yes it had shimmer and small shavings but my clutch housing fingers are grooved deep.. im pretty sure thats where all the worn material is coming from..

Im using Golden Spectro 80 W . I am aware of the o ring. I saw no oil residue inside the coolant tube or cooling sytem coolant. I can mix some coolant and trans oil to see what it looks like but this is dark and grey ish. Also its thick and must be wiped off.

yeah i agree thats the best way but i dont have the shop space to do all that and keep everything sorted and clean. I also just put a new top end on.. might just do more oil changes frequently and clean inside the clutch area the best i can reach with the cover and components off. Im replacing the worn out clutch now. i just tore it apart and there are no sign of leaking there and im talking about trans oil

So I have a 92 Banshee and i`m restoring it.. I`ve done two oil changes is the last 3 hours of riding. The oil is gray dark and thick.. it looks like a mixture of dirt dust, friction plate material and oil. I took the clutch cover off and sprayed and cleaned with brake parts cleaner. It does not come off easily.. my point is do you have any wisdom to flush my transmission better and clean with a solution? Thanks

I have a good full exhaust system, the mufflers have pro circuit engraved in the end caps and the headers have no dents. They are not rusted just old chrome I'm asking $350 shipped anywhere in the usa

Sold thanks !

I need this gone can someone give me an offer

Shipping calculated for 70 lbs.

Message me for chain adjusters

http://m.ebay.com/itm/262273392907?roken=cUgayN&_mwBanner=1

$300?

Bump $1000?

Hello for sale this engine came out of a running bike I bought for parts. The engine has good matching compression 130 each cylinder. The stator flywheel and I take manifold is all there. Add carbs oil exhaust and plug it in. Good to go. I'm asking $1500 OBO after looking online at others for sale. Buyer pays shipping.

Asking $375 I'm located in Needles CA . The exhaust has no dents or damage and they look good. The mufflers are in great shape also. I ran them for a while and moved on to drag pipes.

421 cub rider I wish I did have those pipes I wouldn't sell them though!

Error the tank shroud is Aqua blue

Mike0chek I have a full set of stock shocks they have pink coils Slag the whole chassis is stock and silver painted black radiator and purple tank shroud all stock controls