Infamous039

I am selling my 1991 Yamaha Banshee with a fresh build that was bore .60 over. Bike starts right up and runs excellent, only used SUNOCO 93 gas in the bike with the yamaha two stroke oil from the dealership. Cosmetically the bike looks great for its year and has been taken well care of. Gear oil changed after every 2rides, carbs cleaned out once a month, air filter cleaned after every ride. Never crashed, never rolled, never flipped. I will list everything I have dont to the bike and everything that comes with the bike so look below. Email me or PM me for more pics, also the bike is the one in my sig. Looking to get $1,800 (obo) for the bike with the extras included in the sale. Bike has no title but I will provide a notirized Bill Of Sale to the new owner. Mods Listed Below: Pro Design CoolHead with 21cc Domes +4 Timing Advance Pro Design Air Filter Setup with pre-filter for sand Trinity 2-1 35mm Carb Setup with an extra needle and jets V-Force 2 Reeds Toomey T5 pipes Front Stock Rims on Stock Tires Rear Maxxis Razr2 tires on stock rims Barnett Racing Clutch (Only 2rides on it) Cylinders Bore .60 over with Weisco Piston Kit (Only 13hrs on it) New Stock Crank (Only 13hrs on it) New Crank Seals and all new Gaskets New Lower Motor Mounts Inline Radiator Cooler Brand New Axle Bearings Brand new upper J-Arm Bushings Brand New Lower A-Arm Bushings Brand New Swing Arm Bearings New Stock CDI Box (4months old) After Market Handle Bars New Rear Brake Pads 15/41 Gearing with New OEM Chain (1 month old) Upgraded Rear Spindle from a 2002 Banshee bolt pattern Race Cut Plastics all Black Custom Flame Grill Nerf bars Full Front to Back Skid plate A-Arm Skid Plates Rear Axle Skip Plate The Extras Matching Helmet Matching Chest Protector Set of Rear Sand Sharks on ITP rims Set of Front Fast Trekkers on Stock Rims Bottles of 2-Stroke Racing Oil Bottles of Gear Oil from Dealer Rear Shock Bone If I missed anything I will give it to the new owner when they purchase the bike. Need to sell this bike quickly for financial reasons.

I purchased an idle gear from my local dealer 2days ago for $52. So try the dealer

I have the 35mm carb with my 2-1 into one and my shee runs nice. I think everyone would recomend the 35mm carb.

I have a J-Arm Banshee also, and I got my bushings from ebay for cheap brand new in the box. Make sure you search J-Arm bushings and not A-arm bushings.

If you dont ride illegal spots in Jersey, then you wont be riding much at all.

ok, thanks guys

Dealers fluids prices are costing me too much money. Is there any other 2-Stroke Oils and Gear Oils I can use, that's cheaper and better than the dealer. Please let me know what you guys use and how much it cost???????

From what I know Banshee+Water = Locked Up Motor. Banshee really dont like to deep of water, especially if you have your TORS removed. You can ride through small streams, but not deep amounts of water like you can on a 4stroke.

Make me an offer, also I live in Somerset County right by Rutgers University in New Brunswick

These are Realtor tires on stock rims, they are good for sand and dirt. They have a lot of tread left on them. These came off my banshee. I will ship and I accept Payapl. Make me an offer on them.

I have a set of Billet Reed Spacers with Screws for sale $25 shipped and I also have a 33-35mm Uni Clamp on Air Filter $20 shipped. I also accept Paypal. Let me know if anyone wants this items. Also price is negotiable so send me a PM and if you need pics shoot me a PM. Thanks, Travis

If you want a set of billet reed spacers, I have a set for $30 shipped. Let me know.

I live close to you in Somerset (LiftdT4r). I am luck to be on the high side of town, but there were a lot of streets around me flooded, even cars covered with water up to the roof.

Purchased a 2-1 Carb setup from him. He shipped out immediatly and transaction went smooth, he's a stand up guy. Will do buisness with him anytime.

I agree, John is a great guy. I purchased 2 sets of plastics from him, he had them ready to go when I got there. Great Guy to deal with it.

The trinity intake piece that connects to the reeds has a circle cut out for O-rings. I dont have those O-rings, will I be ok without them and just use reed gaskets?????????

ok thanks bro

I know I need reed gaskets between the Vforce2's and the cylinders, but do I need gaskets between the Vforce2's and Trinity 2-1 intake??????????

I just purchase a Trinity 2-1 carb setup from a HQmember the carb is a PWK 35mm . I live in Central Jersey and need to know what my jetting should be?????? My mods are T5pipes, Vforce2 reeds, Tors removed, CoolHead 22cc domes, Open Airbox with prodesign filter setup, Bore .60 over. Also do I need to use intake gaskets with the Trinity 2-1 setup?????????????? Please give advice banshee experts.

Paypal Payment SENT, check your PM for shipping details. Thanks, Travis

I sent you another PM. Please check. Thanks, Travis

Sent you a PM, please check it.

I know I should have bought the one you had ellison445. I was debating to damn much getting mixed opinions. Now I am pretty sure that I want one.

I know someone is selling one?????????????

Im Looking to purchase a 2 into 1 Carb Setup for my Banshee. Please PM me if you have one fore sale immediatley. Thanks guys