rocketboy

i dont ese how it will flow more than vforce only 2 ways i know of to get more fuel into the cylinder over the convential cage setups ,more reed surface area and/or running thinner( less tension )reeds that open easier ,this srp cage has neither .

i agree with the above statements ,i hope that fucker gets it good

mine says its 20/20

probably like 60 rwhp with t6 pipes yo u need shearers or cpi for that engine

12+ weeks is excessive iMO

.020-.030 is what yo u want ,yo u have another problem iMO try new fresh plugs and be sure pickups and flywheel are clean as a whistle

.035=20.8cc and +7 is way to high for you try +4 instead,jus tcause you work i na machine shop doesnt mean yo ucan port your banshee cylinders ,it is a complicated process and alot of research should go into it before yo uthink of grinding a thing

i have a 65mm cub and would feel confident going up against any stock set of jugs on a 4mil l crank ,gotta ask yourself do yo u want low-midrange torque or screaming topend torque , like others have said... it takes alot more than 800$ to setup either package correctly

after seeing those horrid pics, i wil never allow another spider to pass by me and live . all spiders will be crushed .

movin on up ...to the east side "

mmm fresh milk

what a lame attempt to get people to buy a wheely bar

i think it is like alot of 2 stroke mods they are dependant on each other ,and this hotter coil would be no exception iMO .i can see that some guys have a setup that makes it much less noticable in gains or eve nloss some hp or torque ,while another guy whos engine parameters favor a hotter spark would realize good gains ,theres jus t so many variables to consider for each application .

theres a&s, RDZ, tyson, grand river,etc ..alot of top shops in michigan ,but its gonna cost alot of money too

168 is a fat main ... it may be running too rich on top and sputtering .

clicky

no way ,its nothign personal i like canada ,i even visit it everyonce i n a while . i wil l ship it to you if yo u wi n the auction, but im not doing it for 10$ priority sipping cause i know that shit wil l cost an arm and a leg to ship to you

your back ..shhwhhwooo that was a relief *pulls loaded cocked pistol back out of mouth*

was it chris(fireman) hott who welded it ? free bump

this is shipped to lower48 states only

my ebay auction *clicky*

by boring to it .080 over... your jus t wasting valuable bores to make like maybe .5 more hp .thats a bad idea .do some mods and port the bike and eve n then,the stock carbs will work just fine for you .

i wonder if he was like scarface: as they broke into his house he was shouting "say hello to my little friend " and then tossed his peter at them