Duninshee

I have $40 in paypal for a set of new or used 17cc prodesign cool head domes in good condition. Must not have any scratches, dents, dings, or cracks. $40 is all I have so that includes shipping and fees. Thanks again and help me out please. Pictures are a must!!

Thats what I want are a set of prodesign cool head domes. I have $40 to spend shipped on a set.

What I want are a set of 17cc standard bore coolhead domes that are in good condition. Bring all new and used but if you say that they are new they better be in original packaging or they aren't new. Used domes must be in great condition with no flaws. Pictures are a must!!

PMd you

please let me know if these domes are sold thanks.

I just used a torch. I didn't set the heat really high and I moved fast so the plastic didn't melt.

What he said!

My budy has one with timming retard, cams, edlebrock carb, volocity tube w/ k&n, and he's going with either the alba pipe or the yosh titanium comp series pipe kit. The thing is FAST but not as fast as the shee.

If you need to, you can take them off the box and boil them in hot water for about 5 minutes. Then they should stretch to fit them. I did this to my K&N filters and it worked great.

I got tors elimination kit from Rockymountain. But if you want the actual tors I have a set.

No it isn't. I've had a twist sice I bought my banshee 2 years ago. Its so much nicer than a thumber.

What's that suposed to mean?

could you send pics of the nerfs. [email protected]

I am looking to buy a Dyna FS ignition. It has to be in better then great condition. I don't want new just something close.

I would just say go to the local hardware store and pick out some hose clamps you like. Unless you are looking for some specil type.

I am saying you need to buy jets to get it tuned.

I just put mine in and I love them. Thats all the proof need.

I am fairly sure that they are actually tapered. I just told the machine shop that I wanted them taper bored and they said no problem $80 please.

Keihin doesn't make a 30mm carb. So inorder to get this you have to get the 28mm bored out to a 30mm.

What he said. The 28PWK bored out to 30mm would be a great additon to your bike. I am putting them on my bike as we speak.

Toomey's are more of a dune or high end pipe like CPI and Rockets. They might not be the best pipe for what you are looking for. But then again I could be wrong.

Wiseco takes very good care of their customers I would give them a call and explain what happened. I had a defective piston and they took care of all the work. They even threw down for shipping. I had it back in 2 weeks. Call em. It won't hurt. He is asking what type of oil do you mix in your gas and at what ratio. I.E. (32:1, 40:1 ect....)

OK well I guess i have to go to Checker. Thanks

Unless they are ported I don't think you are going to be going a whole lot faster.

I just put my bike back together and I found coolant leaking in between the jugs and the case. So I tore it all apart and the Coolant rubber plugs are leaking. The clymer says that I should use Gasgacinch sealer but I have no clue what that is. I have some Permatex Ultra Black Hi-Temp RTV Silicone Gasket Maker and I want to know if this will work. Or do I need to find this other stuff.